Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213

    Thumbs up My jetski parts , what do u recommend

    I got RXP 2006 and I have ordered this items from Mr Jerry :

    # 1 Race Engineering Pro OPAS Block Off's for RXP .

    # 2 Ceramic Hybrid Supercharger Bearings For 4-Tec's (Set) .

    # 3 Metal Clutch Washers For 06-07 Style Supercharger .

    # 4 RIVA Rear Exhaust Kit .

    # 5 Riva RXP Stage I Kit .

    # 6 RIVA Pro-Series Sponson Kit .

    # 7 Stainless Steel Replacement Wear Ring .

    # 8 RIVA RXP/RXT/GTX Thermostat Kit .

    # 9 Spark Plugs, Denso sx27 .

    Kindly give me your advice , i m very intersting

    to ride it like freestyle with a little bit perfromance

    with out effecting the engine in the long run .

    Thanx for the recommindation ,,,,,,,,,,,,,,,Ayman
    Last edited by LAB69; 02-08-2007 at 09:26 PM.


  2. #2
    Moderator The Bandit's Avatar
    Join Date
    Jul 2006
    Location
    Wilmette, IL
    Posts
    8,373
    That is a bullet proof setup that will increase the performance significantly!

  3. #3

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by RXP Steve View Post
    That is a bullet proof setup that will increase the performance significantly!
    THAT IS SO KIND FROM U , THANX

  4. #4
    jerry has made a good package for you .

    is this your first boat?

  5. #5

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by jsr racing View Post
    jerry has made a good package for you .

    is this your first boat?
    NO WAY , I ALWAYS BUY THE LATEST , THAT IS

    WAY I DON'T HAVE ANY EXPERINCE , I JUST STARTED

    DOING THIS DUE TO THE BEST DEAL AND REPLY FROM

    MY BEST FRIEND JERRY .......

    ANY WAY I LIKE SPORTS CARS AND I ALWAYS RIDE MY SKI

    IN CRAZY WAY THAT IS I M INTERESTING IN , SO FAR

    I WILL START WITH U GUYS WITH YOUR RECOMMINDATION

    PLEASE KEEP THIS IN YOUR MIND , I M JUST BIGINER

    IN INSTUALLING RACING PARTS ,,,,,,,,,,,

    THANX 4 ALL OF UUUUUUUUUUUUUUUUUUUUUUU

    I M VERY PROUD OF U

  6. #6
    hope to see u soon in world racing participade.
    enjoy your ski it is the best and the faster

  7. #7
    MikeB's Avatar
    Join Date
    Jan 2007
    Location
    Orlando, FL
    Posts
    278
    Sports cars. What do you have?

  8. #8

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by MikeB View Post
    Sports cars. What do you have?
    I USE TO BUY C3 CORVETTE , C4 , C5 , NOW IS

    A YELLOW Porsche GT2 , 2005

  9. #9
    daverxp4's Avatar
    Join Date
    Aug 2005
    Location
    montreal,canada
    Posts
    1,323
    Quote Originally Posted by LAB69 View Post
    I got RXP 2006 and I have ordered this items from Mr Jerry :

    # 1 Race Engineering Pro OPAS Block Off's for RXP .

    # 2 Ceramic Hybrid Supercharger Bearings For 4-Tec's (Set) .

    # 3 Metal Clutch Washers For 06-07 Style Supercharger .

    # 4 RIVA Rear Exhaust Kit .

    # 5 Riva RXP Stage I Kit .

    # 6 RIVA Pro-Series Sponson Kit .

    # 7 Stainless Steel Replacement Wear Ring .

    # 8 RIVA RXP/RXT/GTX Thermostat Kit .

    # 9 Spark Plugs, Denso sx27 .

    Kindly give me your advice , i m very intersting

    to ride it like freestyle with a little bit perfromance

    with out effecting the engine in the long run .

    Thanx for the recommindation ,,,,,,,,,,,,,,,Ayman
    that is one great bullet proof set up but if you like riding hard i would add 3 things to your great list of parts.
    1.automatic bildge pump
    2.and a finger throttle (replaces the stock thumb throttle to finger style,trigger) but that is a matter of prefference.
    3.supercharger impeller riva type you might as well get it done at the same time as you are replacing your clutches and bearings.
    i have ran this set up as you mentioned with great results and 0 problems
    exept for the #1 re's.#7 stainless wear ring #8 thermostat kit
    and keep your pre filter on if you like riding the rough stuff.
    and a cheap things to do and gain a bit of speed fill your ride plate bolts and intake grate and remove your nose cone from the stage 1 kit or at least make sure you put the nose cone with some kind of locktite or other stuff so it will not come loose.
    damm i came a long way also since i started modding myself all thanks to this great forum and its members.
    Last edited by daverxp4; 02-09-2007 at 11:11 PM.

  10. #10

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by daverxp4 View Post
    that is one great bullet proof set up but if you like riding hard i would add 3 things to your great list of parts.
    1.automatic bildge pump
    2.and a finger throttle (replaces the stock thumb throttle to finger style,trigger) but that is a matter of prefference.
    3.supercharger impeller riva type you might as well get it done at the same time as you are replacing your clutches and bearings.
    i have ran this set up as you mentioned with great results and 0 problems
    exept for the #1 re's.#7 stainless wear ring #8 thermostat kit
    and keep your pre filter on if you like riding the rough stuff.
    and a cheap things to do and gain a bit of speed fill your ride plate bolts and intake grate and remove your nose cone from the stage 1 kit or at least make sure you put the nose cone with some kind of locktite or other stuff so it will not come loose.
    damm i came a long way also since i started modding myself all thanks to this great forum and its members.
    Dear friend

    Thanx for the nice info I got from u regarding

    to your reply please and kindly I want u

    to explane three things from what u have written

    for me ( I m new in up grading jet ski's ) m but really

    my concern is not to have any problem at all

    as I m riding my rxp in rough salty water and I use to jump

    waves as well every day about 2 to 4 hours , you have wrote

    # 1 automatic bildge pump ( what is the function of this ).

    # 2 riva super charge impeller ( I don't want to change housing )

    what will do with the impeller it self for my jet ski

    with out change the housing .

    # 3 u have written as below :

    fill your ride plate bolts and intake grate and remove your nose cone from the stage 1 kit or at least make sure you put the nose cone with some kind of locktite or other stuff so it will not come loose.


    how can I fill the ride plate bolts and intake grate ( do u have picture )

    remove the nose cone ( the solas green cone is that right ) and replace it with what ?

    please what is the lockite or other staff , please explane more and I hope

    u got picture for this please help me I m still learning from u guys

    I m just beginner ,please reply me asap ,,,,,,,thanx
    Last edited by LAB69; 02-10-2007 at 07:34 PM.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Parts parts parts what do you need?
    By HallPass in forum Yamaha Classifieds
    Replies: 32
    Last Post: 04-16-2009, 03:02 PM
  2. GPR 1200 parts - What do you need?
    By KawieGuy in forum Yamaha Classifieds
    Replies: 12
    Last Post: 09-15-2008, 10:40 PM
  3. OK So I have Rebuilt and Installed my Engine Now What Do I Do?
    By christian79 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-19-2007, 09:22 AM
  4. Ultra250 OIL...What do you recommend?
    By Mitchlguzin in forum Kawasaki PWC Performance (4-stroke)
    Replies: 16
    Last Post: 08-02-2007, 09:02 PM
  5. What do you recommend?
    By kenshin89 in forum 4-Tec Performance
    Replies: 5
    Last Post: 09-02-2005, 10:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •