Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Apr 2008
    Location
    Plainfield, IL
    Posts
    1,237
    +1
    10

    Fogging oil for rxp

    Hey all. I usually fog the valves through the injector holes and then the cylinders throih the spark plug holes with the seadoo bombardier lube or whatever they call it. I was thinking of using stabil brand marine fogging oil. It says pwcs. Just wondering if that would affect the valve seals? its like 1/3-1/2 the price. Any input or what you guys use?


  2. #2
    AtoMIC_OraNGE greenbullet's Avatar
    Join Date
    Jul 2010
    Location
    Barrie / BuckHORN Ontario
    Posts
    2,509
    +1
    234
    i personally use a tablespoon of 2 stroke injection oil down the plug holes.. coats alot better i feel then the spray or going threw the fuel rail... but to each there own... been doing this for years on my personal skis and customers....

  3. #3
    The Stabil brand sucks, IMHO. I only use Mercury Marine Storage Seal. Tell you what, buy both, spray them side by side on a piece of cleaned steel and set it outside. The side with the Stabil will rust in a short amount of time, whereas the Storage Seal side will protect for months.

    Stabil fogging oil is just like kerosene. MM Storage Seal is really sticky and foamy and covers a lot better.

  4. #4
    AtoMIC_OraNGE greenbullet's Avatar
    Join Date
    Jul 2010
    Location
    Barrie / BuckHORN Ontario
    Posts
    2,509
    +1
    234
    +1 the merc stuff works well too

  5. #5

    Join Date
    Mar 2006
    Posts
    1,833
    +1
    119
    Yamaha fogging oil for my skis.

  6. #6

    Join Date
    Apr 2008
    Location
    Plainfield, IL
    Posts
    1,237
    +1
    10
    Whats the difference between seadoos storage oil and the brp lube or bombarier lube as I think its called?

  7. #7
    Bounty Hunter Carlos Thomas's Avatar
    Join Date
    Jul 2007
    Location
    San Leandro, CA
    Posts
    1,401
    +1
    22
    You can always get this...Amsoil Fogging Oil. I have never used it. But I am thinking about fogging some stuff.


  8. #8
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    here is my thought
    I mix good 2 stroke oil at least 30:1
    then I put in about 1 gal. and run untill I smell the oil
    not only does this lube the valves and cylinders it also does the fuel pump and injectors
    lets see you use foging oil on your injectors...lol
    and every time you start it you lube it

  9. #9
    straight mineral 2stroke oil, through a Les Cooke designed fogging kit

  10. #10
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77

    Re: Fogging oil for rxp

    Just start the engine every two weeks and run it a minute.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fogging oil for 300x?
    By Electron Mike in forum Kawasaki PWC Performance (4-stroke)
    Replies: 42
    Last Post: 06-21-2013, 12:11 AM
  2. WTB Oil cooler for rxp
    By rxpredviper in forum Sea Doo 4Tec Skis
    Replies: 1
    Last Post: 10-31-2012, 05:29 PM
  3. Oil for rxp-x
    By HioSSilver in forum 4-Tec Performance
    Replies: 13
    Last Post: 08-09-2012, 08:18 AM
  4. Wahat oil can be use for RXP ?
    By tkd_xma in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-01-2010, 08:23 PM
  5. Go syntetic or mineral oil for RXP?
    By dre23 in forum 4-Tec Performance
    Replies: 47
    Last Post: 02-12-2006, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •