Results 1 to 2 of 2
  1. #1

    Join Date
    Jul 2010
    Location
    blue springs , mo
    Posts
    141

    95 spx no spark issues

    Black red wire tested from mag at 72 Ohms and the voltage wire cranking produced 14 AC volts, when mpem connected to black red wire produced 4 volts AC, resistance test on coil was within OEM spec.

    Please give me your best advise, the seadoo manual shows to test with a seadoo tester but cant fiqure out why you couldnt get the values from a multimeter.


  2. #2
    unplug the black/red wire from the mpem - but leave the other two black/red wires connected - test for spark..

    the black/red wire going into the mpem is the kill wire..

    Note: the cdi unit is internal with the ignition coil..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 95 SLT750 No Spark Issue
    By dubseven in forum Polaris Open Discussion
    Replies: 3
    Last Post: 11-13-2016, 08:17 PM
  2. No spark issues -95 GTS
    By rocky10781 in forum Sea Doo How To & FAQs
    Replies: 0
    Last Post: 09-28-2013, 10:28 PM
  3. Ok, got a multimeter, would you guys help me check some NO spark issues now??
    By Old Atari Nut in forum Polaris Open Discussion
    Replies: 6
    Last Post: 10-16-2008, 02:24 AM
  4. '95 xp no start issue
    By gorilla03 in forum 2-Stroke Performance
    Replies: 3
    Last Post: 04-05-2008, 05:37 PM
  5. 95' SL750: No spark!
    By SeaBee63 in forum Polaris Open Discussion
    Replies: 19
    Last Post: 07-18-2007, 12:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •