Thread: Rotax 16vane 160mm pump
10-15-2012, 12:35 PM #1
Rotax 16vane 160mm pump
Complete 160mm rotax racing 16 vane setback pump. Comes with FZR driveshaft, 15-25 impeller, and 3 exit nozzles with vanes removed. 1-87.5, 1-84.5 yamaha nozzles, and 1- 82.5 R&D nozzle. Always ran with 75-140 synthetic oil in pump. Has 2 half inch fittings in pump to feed water to intercooler. Most Rotax pumps are 159mm diameter impellers. This one was 160 and i had it slightly enlarged to 160.250mm, then hand clearanced impeller to pump liner. Will work with standard 160mm liner as the majority of the impeller liner is the pump itself being that its a setback pump. Pics are taken with Riva 160mm stainless liner which is not included.
This will fit SHO or GPR conversion but will require a different driveshaft as the FZR shaft is almost 2 inches longer, or you could have this shaft shortened and resplined as another option.
No junk, not damaged in any way, bearings and seals perfect, satisfaction guaranteed as always.
2500.00 FIRM plus shipping and paypal....4K for all this new..
11-07-2012, 07:55 AM #2
12-15-2012, 12:22 PM #3
12-18-2012, 12:04 AM #4
12-20-2012, 09:46 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By IM2FAST4U in forum 4-Tec PerformanceReplies: 18Last Post: 09-27-2012, 08:12 AM
By terryatjetskiworld in forum Yamaha Open DiscussionReplies: 1Last Post: 05-06-2011, 07:59 PM
By rjr in forum 4-Tec PerformanceReplies: 12Last Post: 04-19-2011, 06:30 PM
By gordon lasiter #328 in forum Yamaha PWC Performance (4-stroke)Replies: 6Last Post: 06-09-2010, 05:47 PM
By FAST RXP in forum Sea Doo ClassifiedsReplies: 1Last Post: 05-01-2009, 09:22 PM