Thread: gp 1200r parts
10-18-2012, 05:54 PM #1
10-18-2012, 06:02 PM #2
r&d intake manifold with stuffers 80.00 shipped
r&d 1300 air filter will work on 1200r, mounts at the end of the factory air box 50.00 shipped
gp1200r crank needs rebuild 100.00+shipping
gp1200r riva splash guard 40.00 shipped
the ski was a running ski when it was taken apart all parts work good. any questions please contact me at 609 709 1163, im open to offers i just need the rest of this stuff out of my garage.
Last edited by slowteg97; 10-25-2012 at 10:16 AM.
10-19-2012, 04:20 AM #3
10-19-2012, 09:58 AM #4
yes, the bottom end was gettin very noisey, the reason for the part out. everything spins freely but will need new bearings.
10-19-2012, 10:26 AM #5
- Join Date
- Sep 2012
What MM are the carbs now after the ports and have they been jetted?
10-19-2012, 01:00 PM #6
basicly the big notch in the carbs was eliminated and the ridges were smoothed out. they have been jetted not sure of the size. my ski had riva rec heads, ffk, skat 13/19r, protec cdi, number 3 cyl was dumped over board, d plate, r&d manifold with stuffers and using a stock air box with the 1300 style r&d filter. the ski was vey quick ate up my stx1200r with stinger mod, r&d intake grate and ride plate with a 14/24 prop. my ski ran a tad rich because i wasnt running individual filters but i ocean jumped alot and didnt wanna take a risk of injesting water in the motor. hope this gives you an idea.
10-21-2012, 06:45 PM #7
10-23-2012, 09:11 AM #8
10-24-2012, 05:28 PM #9
10-26-2012, 09:35 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By danny1496 in forum Yamaha ClassifiedsReplies: 7Last Post: 01-28-2010, 09:01 PM
By Inkaddict in forum Yamaha ClassifiedsReplies: 11Last Post: 05-22-2009, 11:03 AM
By Inkaddict in forum Yamaha ClassifiedsReplies: 3Last Post: 10-24-2008, 10:55 AM
By focal13 in forum Yamaha ClassifiedsReplies: 15Last Post: 08-28-2008, 05:54 AM
By focal13 in forum Yamaha 2 Stroke SkisReplies: 3Last Post: 08-02-2008, 02:15 AM