Page 1 of 13 1 2 3 11 ... LastLast
Results 1 to 10 of 127
  1. #1
    To much is never enough Badvgood's Avatar
    Join Date
    Jun 2012
    Posts
    699
    +1
    31

    Badvgood's 2006 RXP Winter Build Project

    So it's time for a full rebuild - Anything goes here. The type of riding I do is salt water, mainly choppy but say 10 days a year are flat and 20 days a year are BIG waves.

    Stuff I have so far;

    Rude 3
    Danny Fuel rail
    Fuel Tank Adapter
    Fuel Pressure gauge (oil filled type) to go on the fuel rail
    UMI Racing headset / Bars
    15 / 22 I think it is sitting in a box
    Intercooler that is up to the job of a 3 Rude in the pipeline
    08 Waterbox and midpipe - Going to read Danny's thread again about gutting etc
    Intake grate R&D
    4" Kanaflex
    Pump wedge & adjustable arm
    80lb Injectors
    CMD Set up
    Torx OPAS Block off's (Same as RE's)
    Torx Racing Stainless Valves
    Torx ECU tuned for 80 lb injectore and 9200rpm
    Torx valve spring kit / retainers
    Torx Exhaust Torque Plate
    CP 8.4 Pistons
    Molnar con rod set
    Race engine mount kit
    Torx racing lightened cam gear sprocket
    Torx block guard
    Torx racing light weight flywheel
    Torx racing lightweight counter balance shaft
    Torx racing 60 mm throttle body
    Torx racing stage 2 performance cam shaft
    Begi

    Stuff I think I need / want;

    08 Oiler mod bits
    Thru hull exhaust
    ARP Bolt set (head / flywheel etc)
    Innovate gauges to monitor the things that the CMD cannot (boost, Exhaust gas temps etc)

    Thanks BVG
    Last edited by Badvgood; 12-06-2012 at 04:03 PM. Reason: Stuff I have already waiting to go on...


  2. #2
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Ahh I'm first to post mee mee coach. Ok intake grate your jumping waves rand d hands down tough as a rock. Look at fizzles I/c if you have a early xs it should bolt up without to much of a brain fart. Handlebars your choice/feel. I love to see you sell that rude 3 and get a et and get the extra dough for other goodies but if you have it oh we'll .afr is mandatory the boost gauge can wait if your budgeting. Get the innovate. Oil mod yes big yes. Arp head and flywheel yes. Get with Patrick he got a set of Re block offs far superior to riva's.

  3. #3
    primorxp's Avatar
    Join Date
    Jul 2009
    Location
    Saint Louis, Missouri, United States
    Posts
    415
    +1
    11
    Spending all that time and money roll that thng over do the bottom and glass in the opass just what I would do

  4. #4
    To much is never enough Badvgood's Avatar
    Join Date
    Jun 2012
    Posts
    699
    +1
    31
    Quote Originally Posted by shrabber View Post
    Ok intake grate your jumping waves rand d hands down tough as a rock
    Don't follow - More info please. Ta

  5. #5
    To much is never enough Badvgood's Avatar
    Join Date
    Jun 2012
    Posts
    699
    +1
    31
    Quote Originally Posted by primorxp View Post
    Spending all that time and money roll that thng over do the bottom and glass in the opass just what I would do
    As in turn the ski upside down and make the bottom pretty and fiber glass over the opas openings? Do I follow you right?

    May do, the hull is perfect. Its a 30 hours ski with one old careful old owner before me, that why I got it as a project ski.

  6. #6
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    R&d grate re block offs they flow through the whole hull not short like rivas

  7. #7
    To much is never enough Badvgood's Avatar
    Join Date
    Jun 2012
    Posts
    699
    +1
    31
    Quote Originally Posted by shrabber View Post
    R&d grate re block offs they flow through the whole hull not short like rivas
    I think Jerry has just put these in the store as I had not seen them before. Same as RS ones I think as RS don't make them anymore and gave the plans to Fizzle, was hoping he would have them ready by now but who knows.....

    http://www.4-tecperformance.com/inde...oducts_id=2142

  8. #8
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Yes sir did not see the name change but if you were budgeting Patrick got them used for 100 less Patrick has the original re's that are extinct vetch is patrick pm him. He is a very knowledgable guy and has a hell of a pit crew with him. The guy is honest. He posted on your thread earlier
    Last edited by shrabber; 10-20-2012 at 07:33 PM.

  9. #9
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Responded to your pm Patrick is vetch very knowledgable guy and he has a hell of a pit crew with him. Honest guy ask him I think he has the re block offs get them from him you will be happy

  10. #10
    To much is never enough Badvgood's Avatar
    Join Date
    Jun 2012
    Posts
    699
    +1
    31
    Quote Originally Posted by shrabber View Post
    Responded to your pm Patrick is vetch very knowledgable guy and he has a hell of a pit crew with him. Honest guy ask him I think he has the re block offs get them from him you will be happy
    No PM Received back, sorry to be a pain!

Page 1 of 13 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Critique my SPX winter build project
    By Alter Ego Trip in forum 2-Stroke Performance
    Replies: 2
    Last Post: 09-21-2015, 10:49 AM
  2. 2006 RXP 215 project - vent Valve assembly question
    By Wink2Point0 in forum 4-Tec Performance
    Replies: 0
    Last Post: 04-13-2014, 11:38 AM
  3. Winterizing 2006 RXP 215, Need clarification about intercooler
    By WoLLy in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 11-22-2012, 09:10 AM
  4. what else should I add? My 07 RXP winter project.....
    By WBoulton in forum 4-Tec Performance
    Replies: 9
    Last Post: 01-15-2011, 07:46 PM
  5. Winterizing 2006 RXP Help.
    By Airborne68007 in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-05-2008, 08:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •