11-04-2012, 09:14 PM #1
Installing a Fizzle IC in FZR with engine cooling kit
Hello guys i have the OEM intercooler with riva upgrade that allows me to add the pump strainer and i get another dedicated line to the intercooler... does theFizzle IC has two lines in and two lines out. ? i'm thinking of getting the Fizzle IC but not sure if it will work with my engine cooling kit. ? on my FZR.
11-04-2012, 09:20 PM #2
Fizzle has a 1/2 NPT on one side and a 1/2 NPT and a 1/4 NPT on the other side.
11-04-2012, 09:25 PM #3
so with the Fizzle i have two in of 1/2npt and one out of 1/4npt i added another pisser with my current setup in my oem upgrade with the fizzle is only one exit with 2 in ?
11-04-2012, 09:59 PM #4
sorry i was reading in other threads found that i should delete oem line and just leave the strainer 1/4 line and the oem pisser is this true ???
11-04-2012, 10:00 PM #5
- Join Date
- Aug 2006
No, you have a 1/2" in and a 1/2" out, with an additional 1/4" port on the back side (1/4" npt is big enough for a 3/8" barb hose fitting). Most guys run the additional to an extra pisser, to make sure you get enough water out of the I/C. You could also plumb the extra one as a flush line to back flush the I/C.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By cuban133054 in forum Yamaha PWC Performance (4-stroke)Replies: 14Last Post: 09-17-2012, 02:19 AM
By peterj59 in forum Yamaha PWC Performance (4-stroke)Replies: 4Last Post: 11-01-2011, 05:49 AM
By silvertaws6 in forum Yamaha PWC Performance (4-stroke)Replies: 1Last Post: 06-08-2010, 10:52 AM
By BPnta in forum Yamaha ClassifiedsReplies: 6Last Post: 04-30-2010, 01:34 PM
By Kelly_A in forum Yamaha PWC Performance (4-stroke)Replies: 43Last Post: 03-31-2010, 08:42 AM