11-06-2012, 01:59 AM #1
How to Make A DIY 4" Intake Seadoo Rxt?
i wanted to figure out how to make/build a 4" intake for my seadoo Rxt and if someone would be nice enough to post a instruction guide or photos, i really just need to figure out what size the coupler from the 4" intake to the Supercharger!
Last edited by cfratt; 11-06-2012 at 02:18 AM.
11-06-2012, 08:08 AM #2
11-06-2012, 08:12 AM #3
11-06-2012, 12:18 PM #4
Here's the filter you will want
You will need to obtain Kanaflex hose from a hose supplier.
Or, just buy a kit already made up.... on shipping charge.... not three or more different shipping costs from obtaining the parts yourself. This kit is hard to beat for the price and comes with everything you need
11-06-2012, 06:27 PM #5
has anyone tried to use a silicone coupler on the sc inlet to 4" piping and air filter on the end. i have 8 ft of 4.125 inch pipe(exactly like the kanaflex) and would like to do this bone cheap.
11-06-2012, 06:56 PM #6
Welcome to the forum!
I would not run just a silicone coupler but that's me.
It would have to be a reducer from 4 inch down to 2.5.
How would you secure it to the hose?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RXPSC215 in forum Sea Doo ClassifiedsReplies: 4Last Post: 07-18-2008, 09:00 PM
By wakeborder556 in forum Sea Doo Open DiscussionReplies: 15Last Post: 02-14-2006, 03:52 PM
By Jeff C in forum Sea Doo Open DiscussionReplies: 13Last Post: 12-07-2005, 09:58 PM
By 1FastTrespiper in forum Sea Doo How To & FAQsReplies: 0Last Post: 09-17-2005, 09:44 PM
By Fabien in forum 4-Tec PerformanceReplies: 9Last Post: 07-20-2005, 04:47 AM