Thread: X-Charger oiler hole block off
11-13-2012, 05:12 PM #1
X-Charger oiler hole block off
Whats the latest with this thread?
Oil hole on X-Charger block off with a set screw.
Leave the hole open to lube the bearings and use the Viton seal to reduce chance of oil leaking into the IC?
11-13-2012, 05:59 PM #2
LEAVE THE HOLE OPEN!!!!!!!! no ifs,ands,or buts about it.....
11-13-2012, 08:18 PM #3
yes, use the viton seal to reduce chance of leakage to the intercooler,
Jerry has them for a good price,
12-06-2012, 07:50 PM #4
Re: X-Charger oiler hole block off
So is it good to have the hole or to leave close becouse i just bought a rude 2 and does not have the oiler hole but i might be able to open it if need it????
12-07-2012, 08:02 AM #5
Open , gives the front bearing a bit of oil ....
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ryanwoodard in forum Sea Doo Open DiscussionReplies: 3Last Post: 07-26-2012, 08:08 PM
By 818RXP in forum 4-Tec PerformanceReplies: 10Last Post: 07-06-2005, 03:26 PM
By Vern in forum 4-Tec PerformanceReplies: 3Last Post: 06-02-2005, 10:34 PM
By RXPNJ in forum 4-Tec PerformanceReplies: 4Last Post: 05-10-2005, 07:24 AM
By wakeborder556 in forum 4-Tec PerformanceReplies: 2Last Post: 05-09-2005, 10:29 PM