Results 1 to 7 of 7
  1. #1

    no spark after motor put back in..07 rxt

    Had to pull motor to replace damaged double gear on the 07 rxt and now i'm not getting any spark. I do hear what sounds like a spark coming from the crank positioner trigger area but nothing at the spark plugs. Any thoughts on what i might have screwed up? Thanks, Steve.


  2. #2
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Are u getting any fault codes ? Double check ur sensors plugs ... There's 2 sensor plugs where the TOPS valve is , they are easy to mix up and causing no spark ...

  3. #3
    i switched the 2 connectors that were the same and still no spark. Could i have missaligned anything when i put the flywheel and trigger back toghether? I remember the trigger had a pin to allign it to the gear but the flywheel did not. Does that matter?

  4. #4
    it was the plugs!! I switched a different one and it fired right up. I just assumed that with my luck I'd be pulling the motor again. Thanks..

  5. #5
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Spark plugs ... Lol ... Always the simple thing ...

  6. +1 by:


  7. #6
    not the spark plugs. it was one of the connections you mentioned. thanks again!

  8. #7
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    Sorry ... Me bad ... Yeah those connections have even caught out BRP from new ...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. No Spark after dropping a valve
    By Antiguan FZR in forum 4-Tec Performance
    Replies: 11
    Last Post: 11-21-2009, 07:01 AM
  2. pulling pump.. put back in or leave off
    By FrankieV123 in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-24-2009, 10:16 PM
  3. SL900 - No Spark after an hour
    By rrated999 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 08-28-2008, 08:34 PM
  4. 1996 sl 700 no spark after update kit
    By racer447 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 06-18-2008, 06:29 PM
  5. No SPARK, after 10 min of raceng!!!
    By xsantia in forum Polaris Open Discussion
    Replies: 5
    Last Post: 09-04-2007, 07:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •