When I was installing the aux cooling line from the pump strainer plate to my new I/C on my FZS, I was having trouble getting the hose to not touch the reverse cable just above the pump strainer plate. I noticed that actually the reverse connection ball on the bucket can be reversed to the inside of the bucket, making the reverse cable about 1 1/2" closer to the body of the pump, and making a good bit of clearance to the hose. When you look at the alignment of the cable and pivot ball, you will notice everything is in a lot better alignment this way anyway.
Yeah, I know I said FRS in the title, its supposed to be FZS