Results 1 to 10 of 10
  1. #1

    GP 1200/800/760 Rideplate Mods

    We've added rideplate modifications for the "old school" GP to our list of extremely fast rideplates.
    These are similar to the plates we ran "back then" on our 71.5 mph singles ( 78.8 on nitrous) and 76 triples ( 80.5 on nitrous ) but with the modern touch.

    GP1200 / 800 / 760 R&D RIDEPLATE MODS

    MOD 1
    Center Surface Machining Only ( Angled )

    MOD 2
    Mounting Surface Machining Only ( Fully Tunable Angle Mod )

    MOD 3
    Center Surface Machining ( Angled )
    Mounting Surface Machining ( Fully Tunable Angle Mod )

    MOD 4
    Center Riding Surface Machining ( With or Without Skegs )
    Mounting Surface Machining ( Fully Tunable Angle Mod )
    Side Riding Surface Machining


  2. #2
    RAIDER RUNNER BULLRAIDER's Avatar
    Join Date
    Nov 2005
    Location
    HOUSTON TEXAS
    Posts
    651
    There you go guys !!!!.Carl is helping out....I can personally vouch for his service and worksmanship.....I am sending Carl ,one of our stock plates cut off at the back and ,he is willing to work it over.....see that is what I am talking about people.
    Last edited by BULLRAIDER; 02-14-2007 at 11:41 AM.

  3. #3
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    What about prices and turnaround time ?

  4. #4
    ....back from the dead.... J-ME's Avatar
    Join Date
    Aug 2005
    Location
    Delaware
    Posts
    1,577
    +1
    2
    Woo Hoo!

    Are these plates in stock and already modded?

    ...or do you rework ours? ...and if so what brands of plates?

  5. #5
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    J-Mee I think you need to give the nitrous a shot.
    Scott.......

  6. #6
    ....back from the dead.... J-ME's Avatar
    Join Date
    Aug 2005
    Location
    Delaware
    Posts
    1,577
    +1
    2
    A "sneaky Pete" system would be fun


    NOS Sneaky Pete Kits

    Click to enlarge


    The Sneeky Pete was designed as a true "cheater kit." This kit will allow a user to obtain that extra tenth of a second without being obvious. It was designed as a very compact, simple-to-use nitrous only injection system. It will be necessary to jet carburetors a little richer while being "sneeky" because no additional fuel source is utilized. The kit comes complete with a super slim 10 oz. bottle, a nitrous solenoid, nylon nitrous line, wiring, 9 volt battery holder, and an assortment of jets.

  7. #7
    RAIDER RUNNER BULLRAIDER's Avatar
    Join Date
    Nov 2005
    Location
    HOUSTON TEXAS
    Posts
    651
    Our plate is pretty complicated.

  8. #8
    cfgp927's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, Missouri
    Posts
    622
    Can these mods be performed on any cast aluminum plate? I.E.....R&D, Riva, Pro-Tec, Shredmaster? Can you post some costs for us Carl? I'd like to send you an R&D plate I picked up recently. Any mods for the stock plates? I've got an 800 and a 1200 plate?
    Mike

  9. #9
    ....back from the dead.... J-ME's Avatar
    Join Date
    Aug 2005
    Location
    Delaware
    Posts
    1,577
    +1
    2
    Talked to Carl today.

    He is doing the work on R&D plates. You can supply the plate or he can get one in a day or 2.

    Call for the pricing 1 516 883 0090.

    I'll be picking up one in about 2 weeks or so.

  10. #10
    Darthraider's Avatar
    Join Date
    Sep 2005
    Location
    Houston TX.
    Posts
    289

    Wink

    Don't let me bum anyone out, but we need 10mph... Not that I don't want 1 or 2 mph from a bolt on plate, we just need to dig deeper and look outside the box. If we used a negative angle ride plate and raised the sponsons..... and it did not bonce you would have a 75 mph single piper.
    Dragging things in the water will never get us there...

    Everyone have a great day, I feel better
    Last edited by Darthraider; 02-20-2007 at 08:31 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. gp 1200 hull 760 engine
    By desertdeweller in forum Yamaha Old School Skis
    Replies: 1
    Last Post: 09-22-2011, 03:36 PM
  2. 98 gp 1200 rideplate
    By dewberryone in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 08-17-2011, 08:58 AM
  3. FS GP/1200 Mod/Race Engine & Drive Parts
    By The Wayniac in forum Yamaha Classifieds
    Replies: 1
    Last Post: 10-28-2010, 12:07 PM
  4. Gp 1200 & gp 800
    By explorer6764 in forum Yamaha Old School Skis
    Replies: 6
    Last Post: 12-13-2009, 11:12 PM
  5. Fs: Yamaha Misc. Parts 800 1200 701 760
    By Marineking in forum Yamaha Classifieds
    Replies: 1
    Last Post: 05-25-2009, 05:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •