Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22

    GPR parts for sale

    Hi folks, after taking a couple years off I'm getting onto the game again and moving on to some new skis. Here's what I have for spare GPR parts, I have no clue what most of it is worth, so feel free to make an offer.

    Stock GP1200R ride plate - $50
    Stock 2000 GP1200R reduction cone with siphon - $50
    Stock 2000 GP1200R stator (replaced shortly before going with an HO pump, no cavitation damage) - $50
    Two impeller housings, one with a stainless liner and one with a plastic insert - $30 each
    R&D anti-cavitation cone - $50
    Solas HO pump Danafly 14/20 pitched to 15/26 by Island Racing - $100 SOLD!
    Solas 14/20 pitched to 15/21 (forget who did it) - $50 SOLD!
    NuJet Pro 6.5 pitched to 12/19 by Island Racing - $50
    Intermediate shaft from 2000 GPR with damper in good condition - $50
    Stainless steel GP800R intake grate - $250
    Riva GP1200R grate modified Phillip_GPR style - $50

    The 2000 GP1200R ski itself is going too, but it currently does not start and has sat for two seasons. Cranks and compression was good last time I checked, but no dash display and would not catch. This was shortly after I'd bought and put in a new Advent CDI, and I was in the process of switching out the dash and electrics box when life took a bit of a turn. The ski has a GroupK 1390 BB, Jim's FF plate (I probably have some spare plates to sell as well), Riva and SS intake grates, VF3 reeds with machined Pro-Tec stuffers, HO pump with '02 shaft and extension, Island air/fuel separator with external fuel pump, and Island modded stock carbs, and and lots of other mods. I'd prefer to sell as a whole and let the buyer rebuild or part out as they like. Seriously, any offer where you come and pick it up with your trailer considered.

    Thanks for looking, and looking forward to getting back out there with some of you guys in the spring!
    Last edited by smackwave; 01-12-2013 at 09:52 AM. Reason: Updating sold items


  2. #2
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    id be interested in the advent and vf3's if you part out. pm sent what heads are you running/

  3. #3
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22
    Stock heads milled by GroupK with the 91 octane modification.

    BTW, if anyone needs them I have a number of spare bolts/nuts/studs for the Riva head girdle kit. Not enough to make a full set, but they're what's left of the spares I kept around for the inevitable bolt snaps. Send me a note if you need one.

  4. #4
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    What do you want for the studs/bolts/ hex heads
    More than one stock head milled?

  5. #5
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22
    Let's say $40 for the girdle kit parts. Sorry, I sold off the other heads I had a while back.

  6. #6
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    pm sent

  7. #7
    Steve STSPERFORMANCE's Avatar
    Join Date
    Dec 2007
    Location
    Cambridge, Ohio
    Posts
    2,701
    +1
    116
    Text sent on nozzle

  8. #8
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22
    Bumpity bump.

    Also have a SS Gp800R grate. $250 will take it, but make an offer.

  9. #9
    improvised tmg97gp's Avatar
    Join Date
    Jul 2008
    Location
    Midlothian Virginia USA ~ On the James River~
    Posts
    1,377
    +1
    10
    Dibs on the HO Dyna fly 14/20 prop.

  10. #10
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Location
    Annapolis, MD
    Posts
    621
    +1
    22
    Sorry bud, already sold. I'll update the original message.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Cleaning out the cabinet: Some GPR parts For Sale:
    By Pale Rider in forum Yamaha Classifieds
    Replies: 38
    Last Post: 07-05-2011, 11:54 AM
  2. FS !!!--**gpr parts for sale good price**--!!!
    By Rt-HemiBoY in forum Yamaha Classifieds
    Replies: 24
    Last Post: 04-15-2011, 10:35 PM
  3. Replies: 20
    Last Post: 08-20-2010, 04:07 PM
  4. FS XL and GPR parts for sale or trade
    By jeepsrdreaming in forum Yamaha Classifieds
    Replies: 1
    Last Post: 12-08-2009, 04:54 PM
  5. FS gpr parts for sale
    By KEYZBUM in forum Yamaha Classifieds
    Replies: 12
    Last Post: 10-14-2009, 07:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •