Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1
    TX21's Avatar
    Join Date
    May 2007
    Location
    North Texas
    Posts
    988
    +1
    7

    2000 GPR + RN Superjet + double trailer

    Family does not ride anymore so its time for a boat at least for a while.

    2000 GPR YAML6109C696 $3800
    1300 Reeds
    1300 4 blade prop
    R+D Scoop intake grate
    R+D Nozzle
    R+D ride plate insert fix (pain in the a$$)
    Riva F/A
    Oside accelerator removal with carb re-jet and t-handles on highs and lows. Chokes still there.
    Fuel clunk
    Wave eater clips
    OEM head cut .025" (not installed)
    Oil pump delete
    D-Plate + Chip
    Changed exhaust manifold because of pitting
    New carb hoses saftey wired on
    AGM Battery
    45 Hours on Crankworks crank + Bearings
    20 Hours on WSM Platnum pistons (stock bore)
    20 hours on crank seals
    I bought this ski with 24 hours on it in 08' and rebuilt it now has 69 hours on hull.
    OEM Cover now has stupid chew marks on the back still stays on but looks like crap. Damm squirrell.
    No idea what it runs top speed wise but add a decent ride plate and it should be 67 ish ?
    I don't want to sell it but I can't take the wife and 2 year old on it so I don't get to ride much. I run stabil marine in it all year and mix it 40:1.

    1996 Round Nose Superjet YAMA41860000 $3000
    14.5-18 Prop (skat? can't remember but its stainless)
    WSM Impellor housing last summer
    Wamiltons AC shortend handpole ($485 Have recipt)
    UMI Bars and finger throttle
    Wamiltons mats and diamond bump guards
    Starter this summer
    Aftermarket ride plate and intake grate
    Rule bilge with switch on the handpole
    Fuel clunk
    Will have a new Yusa AGM battery (waiting till its closer to the season)
    Motor is stock
    I bought this ski in 08 from the original owner and have the recipt from the dealer as well as most of the other recipts.
    I really hate to sell this one but its hard to ride two skis with one person.

    Karavan Trailer $1000
    www.ultimatebunkboards.com bunks they are super super slick solid plastic bunks cost $250+ I don't remember what they were really but they will never have to be changed again.
    All new bearings this summer
    Tires in 09'
    Tail lights early last year
    Diamond plate tool box woth gas shocks

    I don't have to sell this setup but it just kinda drives me nuts since I hardly get to ride as much as I did before the kid.

    Click image for larger version. 

Name:	jetskitralier-1.jpg 
Views:	361 
Size:	146.4 KB 
ID:	289847Click image for larger version. 

Name:	183360_206459126032755_100000060069919_838227_5020956_n.jpg 
Views:	343 
Size:	66.1 KB 
ID:	289848Click image for larger version. 

Name:	IMG_8707.JPG 
Views:	502 
Size:	880.3 KB 
ID:	289849


  2. #2
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    want to sell the cut head?

  3. #3
    TX21's Avatar
    Join Date
    May 2007
    Location
    North Texas
    Posts
    988
    +1
    7
    Quote Originally Posted by thatdude596 View Post
    want to sell the cut head?
    Acctually I want to bolt it on and see what it runs in the water.

  4. #4
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Bolt it on and let u know mph gains

  5. #5
    vomitspot's Avatar
    Join Date
    Apr 2006
    Location
    mobile alabama
    Posts
    722
    that kid looks pissed that your selling his sj
    just sayin....

  6. #6
    TX21's Avatar
    Join Date
    May 2007
    Location
    North Texas
    Posts
    988
    +1
    7
    Quote Originally Posted by vomitspot View Post
    that kid looks pissed that your selling his sj
    just sayin....
    Ha yeah he does.

    If he stops crappin in his pants I'll keep it (He's only two and thats what we are working on now)

  7. #7

    Join Date
    May 2007
    Location
    Lake Texoma, TX
    Posts
    52
    Pm sent.

  8. #8
    benobo's Avatar
    Join Date
    Mar 2010
    Location
    Langwarrin , Australia
    Posts
    96

    Importing

    Keen as to buy the superjet dude just gota figure out how to get bak to Australia
    Quote Originally Posted by TX21 View Post
    Family does not ride anymore so its time for a boat at least for a while.

    2000 GPR YAML6109C696 $3800
    1300 Reeds
    1300 4 blade prop
    R+D Scoop intake grate
    R+D Nozzle
    R+D ride plate insert fix (pain in the a$$)
    Riva F/A
    Oside accelerator removal with carb re-jet and t-handles on highs and lows. Chokes still there.
    Fuel clunk
    Wave eater clips
    OEM head cut .025" (not installed)
    Oil pump delete
    D-Plate + Chip
    Changed exhaust manifold because of pitting
    New carb hoses saftey wired on
    AGM Battery
    45 Hours on Crankworks crank + Bearings
    20 Hours on WSM Platnum pistons (stock bore)
    20 hours on crank seals
    I bought this ski with 24 hours on it in 08' and rebuilt it now has 69 hours on hull.
    OEM Cover now has stupid chew marks on the back still stays on but looks like crap. Damm squirrell.
    No idea what it runs top speed wise but add a decent ride plate and it should be 67 ish ?
    I don't want to sell it but I can't take the wife and 2 year old on it so I don't get to ride much. I run stabil marine in it all year and mix it 40:1.

    1996 Round Nose Superjet YAMA41860000 $3000
    14.5-18 Prop (skat? can't remember but its stainless)
    WSM Impellor housing last summer
    Wamiltons AC shortend handpole ($485 Have recipt)
    UMI Bars and finger throttle
    Wamiltons mats and diamond bump guards
    Starter this summer
    Aftermarket ride plate and intake grate
    Rule bilge with switch on the handpole
    Fuel clunk
    Will have a new Yusa AGM battery (waiting till its closer to the season)
    Motor is stock
    I bought this ski in 08 from the original owner and have the recipt from the dealer as well as most of the other recipts.
    I really hate to sell this one but its hard to ride two skis with one person.

    Karavan Trailer $1000
    www.ultimatebunkboards.com bunks they are super super slick solid plastic bunks cost $250+ I don't remember what they were really but they will never have to be changed again.
    All new bearings this summer
    Tires in 09'
    Tail lights early last year
    Diamond plate tool box woth gas shocks

    I don't have to sell this setup but it just kinda drives me nuts since I hardly get to ride as much as I did before the kid.

    Click image for larger version. 

Name:	jetskitralier-1.jpg 
Views:	361 
Size:	146.4 KB 
ID:	289847Click image for larger version. 

Name:	183360_206459126032755_100000060069919_838227_5020956_n.jpg 
Views:	343 
Size:	66.1 KB 
ID:	289848Click image for larger version. 

Name:	IMG_8707.JPG 
Views:	502 
Size:	880.3 KB 
ID:	289849

  9. #9
    That might be a little expensive to ship

  10. #10
    TX21's Avatar
    Join Date
    May 2007
    Location
    North Texas
    Posts
    988
    +1
    7
    Still have these. I bolted the head on and painted it camo blue and gray. Any interest?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 05 RXT & 2000 XPL W/ LR Double Trailer $6300
    By Alpheus in forum Sea Doo 4Tec Skis
    Replies: 0
    Last Post: 08-22-2012, 07:54 PM
  2. 2000 Roadmaster double trailer in Texas
    By neversatisfiedmotorsports in forum Trailer Classifieds
    Replies: 4
    Last Post: 04-09-2009, 06:42 PM
  3. 2001 Gpr Hull/double Trailer
    By focal13 in forum Conversion Skis Classifieds
    Replies: 0
    Last Post: 08-29-2008, 05:56 AM
  4. 2000 Triton Aluminum Double Trailer
    By rxppr in forum Trailer Classifieds
    Replies: 7
    Last Post: 07-16-2008, 08:06 PM
  5. 2000 Triton Aluminum Double Trailer
    By rxppr in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 07-10-2008, 06:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •