01-23-2013, 05:49 PM #1
Tip of the day: Installing nose cone onto aftermarket Sea-Doo impeller
I have seen many times people here on the forum having issues with a nose cone, regardless of brand coming unscrewed and riding up the shaft.
If you use this simple trick to install your nose cone you will never have a problem again. Use this same procedure for Solas, Speedfreeks and Skat-Trak nose cones.
Stand your impeller tool up in a vice and drop the nose cone down onto it.
Take a large flat head screwdriver and a hammer and knick the threads in three different spots around the perimeter of the nose cone.
Then take some red Loc Tite and apply it generously to the threads.
Tighten up the nose cone on the impeller and you are good to go
01-23-2013, 05:55 PM #2
Go Go Gadget nice to see the tips back.
01-23-2013, 05:55 PM #3
I can attest that this trick does work.
01-23-2013, 06:22 PM #4
- Join Date
- Jun 2008
- GREECE ATHENS , NAXOS
+1 It worked fine for me!!!!
Thanks for the tip Jerry!!!
01-23-2013, 06:33 PM #5
I'm sure this works. Just wanted to mention if you look into it Stainless steel requires the primer too work right. For loc tite to work.
01-23-2013, 06:44 PM #6
Mine would come off almost every other ride until I did this and it has been on tight ever since!
01-23-2013, 06:52 PM #7
It works very well.. so well infact.. is there a TIP to removing it after this procedure?
01-23-2013, 06:59 PM #8
I just used red locktite and let it dry for a week before getting wet and has yet to let go after 2 years.
01-23-2013, 07:14 PM #9
01-23-2013, 08:55 PM #10
Re: Tip of the day: Installing nose cone onto aftermarket Sea-Doo impeller
Thanks jerry just what i was looking for....
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum Sea Doo How To & FAQsReplies: 150Last Post: 03-31-2015, 08:27 AM
By Green Hulk in forum Sea Doo How To & FAQsReplies: 22Last Post: 06-21-2014, 02:15 PM
By Green Hulk in forum Sea Doo How To & FAQsReplies: 90Last Post: 04-19-2013, 10:07 AM
By Green Hulk in forum Sea Doo How To & FAQsReplies: 36Last Post: 10-09-2009, 11:14 AM
By carbuff91 in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 07-16-2006, 11:37 AM