Thread: Boost Gauge
02-07-2013, 10:33 AM #1
Good day all. After lots of ready and input, decided to go about my build in baby steps. Here is the plan, from a existing Riva stage 1 kit.
-Remove Riva 3in air & free flow exhaust.
-Remove mani and tap for 02 sens.
-Install Riva water box and thru hull.
-Install 4" front air (will have a rear air also)
-Mirror mount AFR and Bosst gauge.
-32" Renthals & finger throttle.
I figure with these changes, any problems will be minimal(maybe a water leak from a clamp or something). Boat ran 100% with stage 1 before winterizing. Last parts on the work bench will be, ET127, Bosch 42's, Ex IC and fuel.
My question is, I would like to have the Boost gauge up and running on the stock SCer and IC. Where and how to install? Seached arround but it seems the attachments are no posted.
Thanks for any help!
02-07-2013, 10:40 AM #2
There are 3 nipple ports on the manifold, that you can drill through and attach your hose for a boost gauge. Also you can drill and tap your SCer. exit or if you have a newer ski use the fogging port.
02-07-2013, 10:42 AM #3
I mounted my MTXL where the GPS goes in the glove box. Hidden and safe.
02-07-2013, 11:05 AM #4
Thanks guys! It's an 07 RXP. Any pics on where this is??? Pretty machanically handy but all this stuff is new to this virgin! Would be a great idea and easier way to fog!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mark S in forum 4-Tec PerformanceReplies: 45Last Post: 04-17-2006, 09:59 PM
By Red Devil in forum 4-Tec PerformanceReplies: 15Last Post: 02-27-2006, 09:43 AM
By spidercraft23 in forum 4-Tec PerformanceReplies: 2Last Post: 10-01-2005, 09:13 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 59Last Post: 09-30-2005, 10:09 PM
By Red Devil in forum 4-Tec PerformanceReplies: 3Last Post: 08-09-2005, 09:09 AM