Thread: How to take decals off of RXP?
02-15-2013, 04:32 PM #1
How to take decals off of RXP?
I want to get new decals for my jetski and currently I am trying to remove the old decals with a blowdryer. Any ideas of how I can take them off a little more quickly?
02-15-2013, 04:47 PM #2
Generally, you can grab a corner with your fingernail and start pealing back. Some heat from a hair drier helps. A glue will stay on the paint. That glue can be removed with WD40 or Goo Gone. You will go thru lots of paper towels and it takes some time but it works.
02-15-2013, 04:51 PM #3
- Join Date
- Jun 2010
- Milwaukee WI
3M eraser wheel and an electric drill. Its the cats ass......
02-15-2013, 05:07 PM #4
02-15-2013, 05:32 PM #5
a new razor blade works well too, leaves a little sticky residue sometimes but goo gone cleans it up
02-15-2013, 06:37 PM #6
Use the plastic razor blades + a heat gun on medium. WD-40 for the sticky stuff. I've done 3 like this.
02-16-2013, 08:43 AM #7
- Join Date
- Feb 2013
the best way is a heat gun warm them up and they will peel off.
02-16-2013, 09:03 AM #8
02-16-2013, 09:32 AM #9
Actually exotic signs makes something called "rapid remover" I think. Works amazing for removing goo
02-21-2013, 11:55 AM #10
Use a heat gun and an old credit card or Subway points card. Hit the area with some Goo Gone after. A blowdryer will not heat the area enough and a razor blade will damage the body of your ski. Be careful with the heat gun, don't melt the area too much.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Atliens in forum 4-Tec PerformanceReplies: 16Last Post: 03-22-2009, 07:47 AM
By pepp101 in forum Polaris Open DiscussionReplies: 10Last Post: 07-11-2008, 05:23 AM
By ugadawg131 in forum Sea Doo Open DiscussionReplies: 3Last Post: 06-18-2007, 02:46 PM
By WeavermanXP in forum 2-Stroke PerformanceReplies: 1Last Post: 03-04-2007, 08:19 AM
By GeoRXT in forum 4-Tec PerformanceReplies: 34Last Post: 03-07-2006, 04:54 PM