Results 1 to 7 of 7
  1. #1

    Keihin hard to find parts

    My 1999 Polaris SLH700 has a Keihin CDKII carbs, when I took them apart to rebuild them I found some issues, first was that the screw that holds the jet block on was stripped on both carbs. I was able to get them out but I need new screws, I checked a local hardware shop and they didn't have any with the correct pitch. The other problem was that the plastic tip on the float arm was missing on one of the carbs. I found the parts at Jets R Us, but he cancelled the order because the parts are on back-order Here's the parts I'm looking for and the Sudco crossover number. Any help finding where I can buy them would be appreciated

    FLOAT ARM 1054-823-2000 (Sudco #021-475)
    LEVER PIN 1480-049-2004 (Sudco #021-480)
    SCREW 93500-04008-1H (Sudco #021-053)


  2. #2
    I transcend race Hombre! TBone14's Avatar
    Join Date
    Jan 2011
    Location
    St. Louis, MO
    Posts
    944
    +1
    7
    I have a single Keihin carb that I took off of a triple rack - it is freshly rebuilt and has all of the stuff you need. PM me if youre interested.

  3. #3
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    Do you know the size and thread pitch on that screw? Im sure someone can find it for you. The other parts should be included in a rebuild kit.

  4. #4
    I transcend race Hombre! TBone14's Avatar
    Join Date
    Jan 2011
    Location
    St. Louis, MO
    Posts
    944
    +1
    7
    The rebuilt carb I have will have everything you need and you can use the stuff out of it for your rebuild (It has 0 hours after the rebuild - I cut it off to make frankenKeihins). I'll sell way cheaper than a rebuild kit to save you some $ and it has the screw

  5. #5
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    Quote Originally Posted by TBone14 View Post
    The rebuilt carb I have will have everything you need and you can use the stuff out of it for your rebuild (It has 0 hours after the rebuild - I cut it off to make frankenKeihins). I'll sell way cheaper than a rebuild kit to save you some $ and it has the screw

    Good plan

  6. #6
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    6,515
    +1
    1,261
    just as an FYI, any shop can order any carb hardware you need from Hot Products. They list all the bits down to the tiny screws..it's to shops only and they have a $50 minimum order. Stuff like the jet plate screw and flaot valve retainer are stuff I typically keep in stock, but i haven't ordered much from HP last season. Typically if I get a rat in for service I'll order the rebuild kits from HP along with some spare hardware to make the minimum order.

  7. #7
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    you need 2 center block screws,a lever pin and one arm??i should have all that

  8. +1 by:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts Hard to find part!!! Ultra and stxr???
    By Jamescmei in forum Kawasaki Classifieds
    Replies: 3
    Last Post: 08-25-2016, 12:50 PM
  2. hard to find parts .....help
    By freemandino25 in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 07-09-2013, 05:37 PM
  3. What are some polaris parts that are hard to find new?
    By 1FASTXC in forum Polaris Open Discussion
    Replies: 12
    Last Post: 09-16-2012, 10:43 AM
  4. Hard to find part & an excellent price!!
    By ou812 in forum eBay Finds
    Replies: 5
    Last Post: 05-29-2011, 09:13 AM
  5. Replies: 5
    Last Post: 03-27-2011, 04:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •