Results 1 to 3 of 3
  1. #1
    superair's Avatar
    Join Date
    Aug 2008
    Smith Lake, Alabama

    jet pump rebuild

    Guys, I have just finished assembling my pump with new bearings and seals. Can some of you that have done this before verify that the seal and bearing placement is correct. The inner seal is bottomed out on the flange and the outer seal is sitting 7mm below the outer surface of the pump also it is almost touching the inner seal. The outer bearing is 10mm below the outer edge of the pump. Does this seem correct?

    Click image for larger version. 

Name:	IMG_20130303_134402.jpg 
Views:	77 
Size:	66.3 KB 
ID:	293953Click image for larger version. 

Name:	IMG_20130303_134413.jpg 
Views:	67 
Size:	88.2 KB 
ID:	293952Click image for larger version. 

Name:	IMG_20130303_134507.jpg 
Views:	66 
Size:	76.1 KB 
ID:	293951

  2. #2
    maxadrenaline's Avatar
    Join Date
    Nov 2007
    Mobile AL

  3. #3
    The ft bearing should be sitting against the ft of the pump.
    The 2 seals should be greased and down bottoming out it looks like u didn't press the drive all the way down

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Jet Pump rebuild
    By mr_mcse in forum Sea Doo Sport Boats
    Replies: 9
    Last Post: 07-25-2016, 10:22 AM
  2. 1996 XP Jet Pump Rebuild (I need pointers)
    By Nasty96XP in forum 2-Stroke Performance
    Replies: 1
    Last Post: 05-30-2010, 12:32 AM
  3. waveraider jet pump rebuild
    By johnson7454 in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 06-10-2008, 07:24 PM
  4. hopefully last jet pump rebuild!
    By sea~smith in forum Polaris Open Discussion
    Replies: 31
    Last Post: 05-05-2008, 09:49 AM
  5. Yami Jet Pump Rebuild
    By Oktavius in forum Yamaha Old School Skis
    Replies: 1
    Last Post: 06-06-2007, 08:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts