Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1
    Lakeside518's Avatar
    Join Date
    Jun 2007
    Location
    Clifton Park, NY
    Posts
    265
    +1
    16

    Best method for removing oem graphics

    My IPD number plate will be in this week. I've never had an issue removing graphics with fiberglass hulls. Just wondering what method members are using on nano cell hulls? Rubber wheel, heat gun with adhesive remover?


  2. #2
    maxadrenaline's Avatar
    Join Date
    Nov 2007
    Location
    RETIRED !! In Mobile AL or Wherever I Want To Go
    Posts
    1,414
    +1
    137
    A hair dryer works. Then use GooGone from W-mart. Find it in the paint department.

  3. #3
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    3M eraser wheel. Nothing works better

  4. #4
    Whats that whistling noise? jtskier11's Avatar
    Join Date
    Sep 2007
    Location
    Right side of Kansas
    Posts
    4,342
    +1
    87
    I used a heat gun on all mine. No adhesive was left behind so that was a plus.

  5. #5
    maxadrenaline's Avatar
    Join Date
    Nov 2007
    Location
    RETIRED !! In Mobile AL or Wherever I Want To Go
    Posts
    1,414
    +1
    137
    Quote Originally Posted by jtskier11 View Post
    I used a heat gun on all mine. No adhesive was left behind so that was a plus.
    +1...the stickers peel right off once you heat them up. Sometimes there is no residue left. No paint damage at all.

  6. #6
    Carbonic's Avatar
    Join Date
    Sep 2011
    Location
    Omaha, Nebraska
    Posts
    448
    +1
    32
    I use a heat gun as well and it takes very little effort to remove them..

  7. #7
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,134
    +1
    205
    Pulled mine off when the ski was sitting out in the hot sun. No residue if you pull slow. Heat gun/hair dryer work good too.

  8. #8

    Join Date
    Jul 2005
    Location
    Central North Carolina
    Posts
    3,847
    +1
    528
    Use caution with a heat gun on your hull! I recomend a hair drier on high for most people to use unless you are experanced with a heat gun it is best to use a hair drier. Itr might take a little longer but much less danger of over heating your hull IMO. Tommy Jordan

  9. #9
    volltrex's Avatar
    Join Date
    Dec 2007
    Location
    Jersey CI
    Posts
    616
    +1
    36
    Yep, hair dryer worked for me!

  10. #10
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Quote Originally Posted by BryanP View Post
    3M eraser wheel. Nothing works better
    Yup!!!

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Water Spots - Best Method for Removal
    By Pwgsx in forum Sea Doo Open Discussion
    Replies: 14
    Last Post: 09-30-2016, 03:06 PM
  2. Anyone have a good method for removing Yamaha valve Guides?
    By jasonstackhouse in forum Yamaha PWC Performance (4-stroke)
    Replies: 9
    Last Post: 07-06-2016, 08:13 AM
  3. Methods for removing the coupler from engine to split cases
    By JoeyDFZS in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 10-17-2014, 08:30 AM
  4. Best place for OEM parts
    By charliebabb in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 10-03-2012, 02:01 PM
  5. Best place for OEM Kawi parts
    By Fulldrawmike in forum Kawasaki PWC Performance (4-stroke)
    Replies: 2
    Last Post: 08-12-2009, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •