Thread: 2005 rxp stereo install
03-06-2013, 11:03 PM #1
2005 rxp stereo install
i installed a a kenwood cd palyer in the storage compartment under the steering wheel. i also put a stinger lcd volt metere in there and added a cig lighter to charge my phone. i made 2 fiberglass enclosures to house 2 6.5" mtx wet n wild full range speakers. i upgraded the battery from a 30ah model to a interstate gel cell 35ah. i had to modify the battery tray a liltte bit, but its worth it. i made a area to mount the amp and the wiring, such as fuses and relays. i have dont alot of car audio in the past. I wanted the install to sound great but it has to look the part also. i spent about 25 hours doing the work.
The fiberglass boxes take alot of time from start to finish. All the wiring is stinger pro ofc and i used stinger pro fuse holders. Everything is properly fused for the utmost safety. I chose the rockford fosgate pbr300.4. Its a slamming amp, it does 75x4 and its cea 2006 rated. i bought 2 sets of spaekers, but cant find a suitable location for the second set. Here is the complete video if you care to watch it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By usamps in forum 4-Tec PerformanceReplies: 1Last Post: 08-28-2012, 09:05 PM
By 05gtxsc in forum Sea Doo Open DiscussionReplies: 1Last Post: 02-14-2006, 01:36 PM
By Teddy57 in forum 4-Tec PerformanceReplies: 14Last Post: 12-03-2005, 03:54 PM
By WildBill9000 in forum Sea Doo Open DiscussionReplies: 5Last Post: 05-31-2005, 03:18 PM
By GSXER2 in forum Sea Doo Open DiscussionReplies: 34Last Post: 05-29-2005, 11:50 PM