Results 1 to 6 of 6
  1. #1
    EH Team Water Pig's Avatar
    Join Date
    Oct 2007
    Location
    St. Catharines, Ontario, CANADA
    Posts
    773
    +1
    66

    "09 RXP-X prop & pump different from "08 prop & pump ???

    I'm looking for a second OEM prop for my '08 RXP-X and I was offered an '09 prop but then advised by another GH member that the two years are different. I checked the part numbers for the pump housing and they are the same for both but the prop part numbers are different. I thought that the early PX's were all the same. Can someone please clarify?
    Thanking you in advance,
    Gord
    Last edited by Water Pig; 03-08-2013 at 10:40 AM.


  2. #2
    lazsrxp's Avatar
    Join Date
    Oct 2012
    Location
    Miami
    Posts
    460
    +1
    3
    Can you check the OEM part store for the part#

  3. #3

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    04-08 is the older version where as the 09+ use the o-ring behind the impeller. Solas calls them out as 04-08 SRX where as the 09-12 is a SRZ.

  4. #4
    EH Team Water Pig's Avatar
    Join Date
    Oct 2007
    Location
    St. Catharines, Ontario, CANADA
    Posts
    773
    +1
    66
    Thanks Jim. I had no clue.

  5. #5
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    The first one is a 09 OEM prop the second pic is a 08 SOLAS prop. You can't buy the 08 pump anymore thats why the pump numbers are the same. You can take the guts out of the 08 earlier pump and place in new pump and 08 prop will work. You would need a 09+ prop, if you took the guts out of a 09 and place in a 08 pump. 09 later pump and later shaft set up can use the 08 prop in a 09-11 PX, but not the other way around.

    Hope thats clear. LOL
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Prop3.jpg 
Views:	46 
Size:	42.3 KB 
ID:	294314   Click image for larger version. 

Name:	Prop2.jpg 
Views:	43 
Size:	42.6 KB 
ID:	294315  

  6. #6
    EH Team Water Pig's Avatar
    Join Date
    Oct 2007
    Location
    St. Catharines, Ontario, CANADA
    Posts
    773
    +1
    66
    jp1300r,
    Thanks for the pics and information. I had no idea.
    Is one set-up any better than the other or is it just a make work program on the part of Sea-Doo?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 14
    Last Post: 05-10-2013, 09:25 PM
  2. FS - Parts 09' RXP-X ECU, Gauges w/ bezel, Venturi, Pump, Rear Cowling
    By ATNryan in forum Sea Doo Classifieds
    Replies: 12
    Last Post: 09-08-2012, 11:01 PM
  3. Replies: 25
    Last Post: 07-06-2010, 02:35 PM
  4. '08 to '09 RXP X Prop Interchangability.
    By SuperCharged/IC in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-15-2010, 09:30 PM
  5. RXP & RXP-X - What's the difference in the stock prop?
    By Jarrett in forum 4-Tec Performance
    Replies: 8
    Last Post: 03-23-2010, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •