Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46

    Custom intercooler

    Hi Guys Im looking to sell my custom intercooler, It has a 550HP pace intercoolers core

    It has 13mm inlet, main outlet and 8mm bleed fittings, I was planning on running it like the 08 up boats where the main feed is T'eed into the cooler and then dumping the outlets. I would not suggest that you try to put all the flow through this icer, Pace told me that the water flow should not be too fast as it effects heat transfer.

    The core is one of there race cores and features very high density fin and tube design, its designed to have minimal pressure drop with outstanding tempreture control, if you want to get those AIT's down without heat soak this is the cooler for you. This is not a cheap Chinese core...

    The boost inlet and outlet match the Scer and Throttlebody so that makes for a nice clean install.

    Im looking for £250 plus shipping and paypal, which is far less then this cost to build and its never been used...

    Ill post worldwide from the UK

    Any other questions pm me, ill consider sensible offers.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC_0189.jpg 
Views:	159 
Size:	74.1 KB 
ID:	294517   Click image for larger version. 

Name:	DSC_0188.jpg 
Views:	145 
Size:	80.5 KB 
ID:	294518   Click image for larger version. 

Name:	DSC_0187.jpg 
Views:	148 
Size:	68.4 KB 
ID:	294519   Click image for larger version. 

Name:	27052011189.jpg 
Views:	188 
Size:	78.6 KB 
ID:	294520   Click image for larger version. 

Name:	27052011190.jpg 
Views:	144 
Size:	32.5 KB 
ID:	294521  
    Last edited by R88ory RXP; 06-14-2013 at 07:13 AM.


  2. #2
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    more pics

    R88
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC_0191.jpg 
Views:	117 
Size:	43.5 KB 
ID:	294522   Click image for larger version. 

Name:	DSC_0190.jpg 
Views:	111 
Size:	74.1 KB 
ID:	294523  

  3. #3
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Good deal for 300

  4. +1 by:


  5. #4
    ou812's Avatar
    Join Date
    Jun 2006
    Location
    Riverside,ca
    Posts
    6,210
    +1
    198
    Quote Originally Posted by shrabber View Post
    Good deal for 300
    £300 = 448.00 USD.. Still not bad for a serious IC

  6. #5
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by ou812 View Post
    Quote Originally Posted by shrabber View Post
    Good deal for 300
    £300 = 448.00 USD.. Still not bad for a serious IC
    Cheers pal, just to confirm that is £300 GBP.

    R88

  7. #6
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Oh sorry

  8. #7
    rxpdoo's Avatar
    Join Date
    May 2006
    Location
    Trinity, Florida, United States
    Posts
    2,997
    +1
    122
    Quote Originally Posted by R88ory RXP View Post
    more pics

    R88
    rory the inlet is 2.5 inches? and can you give the dimensions of the tank w, h length thx in inches if you can !

  9. #8
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by rxpdoo View Post
    Quote Originally Posted by R88ory RXP View Post
    more pics

    R88
    rory the inlet is 2.5 inches? and can you give the dimensions of the tank w, h length thx
    They are the same diameter as the SCer and TB, I can let you know the exact dimentions tomurra. Do you want the overall dimentions or just the size of the core???

  10. #9
    rxpdoo's Avatar
    Join Date
    May 2006
    Location
    Trinity, Florida, United States
    Posts
    2,997
    +1
    122
    the size of the core length, w ,h don't have much space also center to center ofinlet to outlet in inches thx
    don't know the size of sc but assume it is 2.5 inches

  11. #10
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by rxpdoo View Post
    the size of the core length, w ,h don't have much space also center to center ofinlet to outlet in inches thx
    don't know the size of sc but assume it is 2.5 inches
    Think its like 68-69mm just over 2.5" the core is a 2 x 40mm row which with the meat between the rows ends up at 100mm, then its 100mm stack by 300mm long, so 4x4x12 roughly in inches.

    It is very compact compared to say an xs cooler, more like the size of the latest cooler from seadoo thats quite small.

    I can get you some pics tomorrow with a tape measure so you can get a good idea.

    Rory

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Custom intercooler install with modified pipe routing - thoughts?
    By Makesumwake in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-27-2016, 08:06 AM
  2. SOLD custom intercooler kit
    By superair in forum Yamaha Classifieds
    Replies: 7
    Last Post: 03-01-2014, 02:51 AM
  3. SOLD Custom intercooler setup for SHO
    By Gus13letter in forum Yamaha Classifieds
    Replies: 10
    Last Post: 02-28-2013, 01:51 PM
  4. SOLD YAMAHA FX-SHO FZR FZS 2008-2013 custom intercooler with bracket
    By prostocker in forum Yamaha Classifieds
    Replies: 7
    Last Post: 01-21-2013, 02:00 AM
  5. Custom Intercoolers...
    By STALKER FZR in forum Yamaha PWC Performance (4-stroke)
    Replies: 40
    Last Post: 10-18-2011, 08:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •