Thread: ET Watercooler Tips. Wanted.
03-12-2013, 08:10 PM #1
ET Watercooler Tips. Wanted.
Guys I just got my front Houseing from NILS and he tapped all my boses for the ET watercooler for me.
Yes, I know I can easly do this without asking, but I value all input from things I have never put on before so I dont screw anything UP.
Anyway I got the rubber faced washers as Duke mentioned, but any other tips for the install would be great.
I have tried to install it and it seams as if you really need to push real hard to get it over the lip of the inlet.
Also for REC Riding would you use it or not?
03-12-2013, 08:23 PM #2
I just put silicone on the 4 bolts and grease on the o-rings and had no leaks
03-12-2013, 08:26 PM #3
So the dang O-Rings will seal? The big one just seams as if no way? Good to know. I was also thinking of silicone in the bolt hole.
SO with a little grease it will slide over the inlet?
03-12-2013, 08:41 PM #4
tire lube on the o rings works like magic. slides right over
03-12-2013, 08:49 PM #5
I greased the shit out of mine with sunroof track lube from work, almost like Vaseline. It's a tight fit
03-12-2013, 09:22 PM #6
silicone will work fine... dont be shy with it... make sure the orings sit flush
03-13-2013, 01:07 AM #7
- Join Date
- Aug 2009
- Beaumont, Texas
I might have to fab one of those and test it myself. I had this idea about 2 years ago but I figured it would be retarded since it was not in production yet. I will make one and put my hand on the outlet hose and see if it really removes the heat.
Keep us updated and see what you come up with.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Rt-HemiBoY in forum Yamaha ClassifiedsReplies: 5Last Post: 05-22-2012, 10:08 PM
By Rt-HemiBoY in forum Sea Doo ClassifiedsReplies: 3Last Post: 05-22-2012, 12:38 PM
By lozza in forum Yamaha Open DiscussionReplies: 15Last Post: 03-22-2012, 11:32 PM
By JoeyDFZS in forum Yamaha PWC Performance (4-stroke)Replies: 16Last Post: 08-25-2011, 07:36 AM
By dkpralle in forum Polaris How To & FAQsReplies: 2Last Post: 04-27-2007, 12:10 AM