Results 1 to 6 of 6
  1. #1
    auto culto's Avatar
    Join Date
    Mar 2013
    Location
    Leicestershire UK
    Posts
    169
    +1
    1

    Stator bearings and seals

    Whilst I am waiting to source a drive shaft I thought I would crack on and replace the stator bearings. I can't seem to find a link on doing this job and dare not peel the seals out then press the bearings untill I know there is nothing to damage. I am presuming its like a car hub ? 2 seals , 1 c clip and just press the centre shaft out ?

    780SLX 1995

    Also does anyone know the bearing and seal sizes. I have the polaris part number but that equates to sweet fa over here.


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,273
    Quote Originally Posted by auto culto View Post
    Whilst I am waiting to source a drive shaft I thought I would crack on and replace the stator bearings. I can't seem to find a link on doing this job and dare not peel the seals out then press the bearings untill I know there is nothing to damage. I am presuming its like a car hub ? 2 seals , 1 c clip and just press the centre shaft out ?

    780SLX 1995

    Also does anyone know the bearing and seal sizes. I have the polaris part number but that equates to sweet fa over here.
    In no way are the jet pump stator bearings the same as a car hub, except perhaps for them going in circles

    Start here ==> Polaris Jet Pump

  3. #3
    auto culto's Avatar
    Join Date
    Mar 2013
    Location
    Leicestershire UK
    Posts
    169
    +1
    1
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by auto culto View Post
    Whilst I am waiting to source a drive shaft I thought I would crack on and replace the stator bearings. I can't seem to find a link on doing this job and dare not peel the seals out then press the bearings untill I know there is nothing to damage. I am presuming its like a car hub ? 2 seals , 1 c clip and just press the centre shaft out ?

    780SLX 1995

    Also does anyone know the bearing and seal sizes. I have the polaris part number but that equates to sweet fa over here.
    In no way are the jet pump stator bearings the same as a car hub, except perhaps for them going in circles

    Start here ==> Polaris Jet Pump
    Buggered if I can find it in that link. Spent far to long on the pc this evening hunting shafts and info so I am off to bed and will have a look tomorrow with fresh eyes lol

  4. #4
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,273
    Quote Originally Posted by auto culto View Post
    Quote Originally Posted by K447 View Post
    ...

    Start here ==> Polaris Jet Pump
    Buggered if I can find it in that link...

  5. #5
    I'm addicted to Polaris PWC ghostinstallations's Avatar
    Join Date
    Aug 2011
    Location
    Rochester, New York
    Posts
    920
    +1
    28
    Towards the bottom of the page, cant miss it....

  6. #6
    auto culto's Avatar
    Join Date
    Mar 2013
    Location
    Leicestershire UK
    Posts
    169
    +1
    1
    how the hell did i miss that lol, must be blind

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. i need pump rebuild kit and thru hull bearings and seals
    By lxman88 in forum Polaris Open Discussion
    Replies: 36
    Last Post: 08-06-2014, 03:52 PM
  2. Need assistance. How to remove the center driveshaft bearing and seal
    By pjv911 in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 03-22-2011, 07:34 PM
  3. FS New SHO/FZR pump bearings and seals
    By BPnta in forum Yamaha Classifieds
    Replies: 3
    Last Post: 12-04-2010, 10:45 PM
  4. Replacing pump bearing and seals.
    By aussie rxp in forum 4-Tec Performance
    Replies: 7
    Last Post: 03-22-2010, 11:34 PM
  5. part numbers for bearings and seal in the pump housing
    By gvnitup in forum Polaris How To & FAQs
    Replies: 2
    Last Post: 05-03-2007, 08:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •