Page 1 of 22 1 2 3 11 ... LastLast
Results 1 to 10 of 211
  1. #1
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134

    2012 RXP-X 260 rs [Stock to Stage 3+ Build With Riva Athena]

    Been getting a few PM's about the Athena so thought I would start a build tread.

    I did think about leaving the ski stock and to be honest it was such a blast stock and light years ahead in terms of handling, both cornering and rough water, I almost had myself believing it.
    But like any good addict I could not help myself.

    This is what I have to go on the ski;
    • Riva Athena ECU. INSTALLED
      • Riva Athena Dash Logger. INSTALLED
      • Riva Athena Lambda kit.INSTALLED
    • 4" Intake up to front. INSTALLED
    • Fizzle catch can.. INSTALLED
    • TDR WB with 3" outlet.
    • Riva through hull exhaust.INSTALLED
    • Exhaust spacerINSTALLED
    • Riva Valve train.
    • 28 lightened Cam.
    • RR Cam Sprocket.
    • Precision PT1001 Intercooler.
    • Aeromotive FPR, Billet Fuel Rail & Black Braided lines.
    • Aeromotive fuel pump.
    • 100lb injectors.
    • ET 70-145/ with Cooler.
    • 15/20r
    • SF Nose cone.
    • SS Wear ring.
    • Riva Trim Tabs.INSTALLED
    • R&D Grate. INSTALLED
    • Jettrim Seat Cover.
    • Riva Sponsons.INSTALLED
    & a few other bits...................

    Click image for larger version. 

Name:	12px on Trailer.jpg 
Views:	4691 
Size:	113.6 KB 
ID:	295053
    Last edited by Sayers; 04-16-2013 at 07:39 AM.


  2. #2
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Athena Installed


    Click image for larger version. 

Name:	Athena ECU 1.jpg 
Views:	1489 
Size:	104.6 KB 
ID:	295054



    And dash install.
    Click image for larger version. 

Name:	Athena Dash 3.jpg 
Views:	379 
Size:	87.3 KB 
ID:	295057Click image for larger version. 

Name:	Athena Dash 2.jpg 
Views:	312 
Size:	58.5 KB 
ID:	295056Click image for larger version. 

Name:	Athena Dash 1.jpg 
Views:	605 
Size:	97.4 KB 
ID:	295055

    Dash requires a little bit of wiring but made very easy by riva supplied wiring kit with pins to insert into plugs and fuse box. I Chose to hack some the dash out so I could mount it flush and hide the wiring, rather than use the available mount.
    Last edited by Sayers; 03-17-2013 at 03:24 AM.

  3. #3
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Left my laptop at work so could not check the map but something is deffinately up............... http://www.greenhulk.net/forums/show...191850&page=20


    The ski feels alot more lively with the Athena ECU, the DBW is more responsive & love the key on and instant start (no more having push start, time putting the key on, listen for two beeps and then push start again).

    Had a quick run today, picked up a couple of MPH, didnt want to push it as the rpm was still overshooting. will sort it during the week when I can hook it up to the laptop and check the map.

  4. #4
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    This ought to be fun.

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by troyheb View Post
    This ought to be fun.
    Nudging 80 yours is flying.

  6. #6
    A smart admits!A wicked excuses!An idiot insists! mitsakosgt's Avatar
    Join Date
    Jun 2008
    Location
    GREECE ATHENS , NAXOS
    Posts
    2,691
    +1
    40
    You have a nice looking ski Paul!!! What RPM are you running? Top speed???

  7. #7
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by mitsakosgt View Post
    You have a nice looking ski Paul!!! What RPM are you running? Top speed???
    Hey Mitsa,
    I'm running 9400 on stock valve train


  8. #8
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by mitsakosgt View Post
    You have a nice looking ski Paul!!! What RPM are you running? Top speed???
    Have only seen 69mph out of it today in the chop. Couldn't push it for long as was still overshooting rev limit. No doubt it will easily do 70+ with just the Athena ECU. Need some decent weather to get some speed runs in.................. after I sort out my issues with the ECU.

  9. #9
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    I see u still have old trusty in the back ground .... Lol

    Keep the info coming ..

    Looking great ....

  10. #10
    AtoMIC_OraNGE greenbullet's Avatar
    Join Date
    Jul 2010
    Location
    Barrie / BuckHORN Ontario
    Posts
    2,509
    +1
    234
    that trailers badass lol i want one and paint it orange haha

Page 1 of 22 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2012 RXP-X 260 Stock AFR's - Running Lean
    By superman in forum 4-Tec Performance
    Replies: 134
    Last Post: 09-14-2014, 10:45 AM
  2. What should i do next to my 2012 RXP-X 260 Please ?
    By waz480 in forum 4-Tec Performance
    Replies: 77
    Last Post: 07-15-2014, 04:19 PM
  3. Looking to buy 2012 RXP X 260
    By OHIOJOE in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 06-29-2012, 11:17 AM
  4. Replies: 0
    Last Post: 02-21-2012, 10:23 PM
  5. Replies: 0
    Last Post: 02-21-2012, 10:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •