Thread: Various 4tec parts
03-21-2013, 12:33 PM #1
Various 4tec parts
Paypal and shipping prices are NOT included below unless stated otherwise. At this time I do not want to ship international so it is US only. Thanks
Email for pics, too many parts to post pics of everything
TDR waterbox for s3/t3 hulled skis (used 3 times ever) $250
Solas 15/20 bent to 15/19 - $200
2009 rxtx rocker shaft and rockers - $100
ET 68-140 latest revision complete supercharger (28 hours) - $1000
Set of 3 ID 1000 injectors (about 20 hours on them) - $250
s3 hull ski Riva gen3 intercooler plus custom relocate kit (pm me for pics) - $625 shipped
2009 rxtx magneto - $40
New OEM 4tec head gasket - $85 shipped
Set of 3 good 4tec coils - $100
Oil cooler (old and new style) - $40 each
New K&N oil filters for 4tec - $10 each
83mm RXT nozzle - $60
MTX-L gauge with o2 sensor and real carbon fiber bezel - $135
2010-2011 rxtx OEM waterboxes (2 available) - $100
2009 rxtx front oil pump (mint) - $80
3 low hour (under 25) 4tec connecting rods - $110 shipped
4tec balance shaft - $50
Stock doo fuel rails - $20 shipped each
Red label J-pipe $100
2005-2009 Rxt 2 piece seat with brand new Hydoturf black,cf, and red stitching. No ass has even sat on it yet - $300
RXP racing seat cowl $50
Seadoo drive by wire throttle body $200
2012 4tec OEM thermostat - $35
2006 fuel sending until with fuel pump - $75
All black Seadoo engine cover - $25
2005 rxt driveline rebuild kit. All brand new OEM parts (bellow, c clip, carbon seal, worm clamps, hat)
Riva Wedge (no hardware though) - $40 shipped
2010+ seadoo RXTX/RXT 260 OEM ski cover - $125 shipped
2009 rxt iS hull with seat. (missing hood and has damage to top fixed deck due to storm) - pm for info
I probably have a bunch more that I am forgetting. If you need anything that is not listed just ask.
Last edited by ecpChris; 10-17-2013 at 08:31 AM.
03-21-2013, 01:02 PM #2
Is that the open loop Riva thermo? If so, i'll take it.
03-21-2013, 01:16 PM #3
If it turns out it isn't the open loop thermo let me know if you need one. I have some left from when I used to make open loop cooling kits. Actually, I have everything for the whole open loop kit minus the plate that blocks off the OE thermostat housing when it's removed.
Last edited by JFizzleJR; 03-22-2013 at 07:50 AM.
03-21-2013, 01:19 PM #4
03-21-2013, 01:26 PM #5
03-21-2013, 03:30 PM #6
ill take the banged up head.
03-21-2013, 04:07 PM #7
03-21-2013, 04:50 PM #8
Not any longer but I have blue -6AN fittings if you decided to make your own.
03-21-2013, 06:20 PM #9
Hello I buy 2009 RXT iS stock ECU (Bosch). fits lightened 629 cams to my RXP-X and it's something forces with it? you exhaust couplings with head pipe ass'y to the RXP-X is not j pipe
nice if you can send to Norway? have shipping address in usa but also take some time before I get it. If there is too much stress send it to the address I have in the usa.
03-21-2013, 06:39 PM #10
I'm so sorry, but I do not exactly understand what you are asking. The ecu is a stock ecu and not required for the 629. No clue what you are asking about head pipe and j pipe. I will only ship to USA
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By rxpblast in forum Sea Doo ClassifiedsReplies: 28Last Post: 09-04-2009, 02:21 AM
By kenshin89 in forum Sea Doo ClassifiedsReplies: 28Last Post: 03-10-2009, 10:38 AM
By aha in forum Sea Doo ClassifiedsReplies: 0Last Post: 02-18-2009, 10:21 AM
By 05RXPnoob in forum Sea Doo ClassifiedsReplies: 14Last Post: 10-04-2008, 06:00 PM
By skoepp in forum Sea Doo ClassifiedsReplies: 37Last Post: 06-08-2008, 10:46 PM