Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238

    Gp1200r big bore cylinders and parts

    i have three lowell horning ported 1400cc big bore jugs with wrist pins, needle bearings, and one good piston with rings. i was going to either build a 1400cc triple monster or keep them for my ported 1200cc triple. im selling them due to the fact i have a crack at a 2008 rxpx 255.

    2 of the three jugs are useable with a light hone or take some scotch brite to them. the piston and rings are good to go as well as needle bearings and wrist pins. the one cylinder will need renicked due to the nickasil being washed off as shown in pics.

    the head in the pic has some damage as shown in the pics.

    any further questions or pics needed please feel free to ask. make me a fair offer on the parts and they are yours

















  2. #2
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    will trade for rxp parts as well that im planning on buying

    like new equipment only
    riva sponsons
    speed freaks modded stock plate
    rrfpr set up
    umi setup
    et wheel for x charger

  3. #3
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Offers

  4. #4
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    no offers?? need these gone can use the cash

  5. #5
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    ttt

  6. #6
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    how about 350.00 ohio state buckeye special

  7. #7
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    How about A I got ripped off bump by new guy adrian52592. After some interest from a few guys I started taking detailed pics and REALLY looking them over that I noticed every jug has an issue. I guess that's why he sold them. I was old only one jug was bad and all three are. I have contacted him numerous times and his response and attitude via text was why are you telling mev7 days later. Simple fact is the one of the jugs has a gouge on one of the ports which will catch a ring, th other "good" jug has tck welds on the corner of the skirt and someone has tried sanding the top. I'm glad in one hand that noone bought them quickly and I would have looked like the asshole. In hindsight I should have looked the over very carefully after unboxing as well as before posting on here. I got anxious as to get one cash as I'm trying o purchase a local 2008 rxp 255.

  8. #8

  9. #9
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Ttt

  10. #10
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Any offers or trades

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS GP800R GP1200R Big Bore setup with gas valves
    By philip_gpr in forum Yamaha Classifieds
    Replies: 7
    Last Post: 07-21-2010, 08:54 PM
  2. FS Riva gp1200r big bore partout
    By SonicRA in forum Yamaha Classifieds
    Replies: 2
    Last Post: 05-04-2010, 04:55 PM
  3. gpr800 big bore cylinders
    By yz450f in forum Yamaha Open Discussion
    Replies: 7
    Last Post: 01-07-2009, 05:48 PM
  4. 785cc Big Bore Cylinder
    By getreal in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 12-16-2008, 02:14 PM
  5. cylinder question gp1200r big bore
    By spyder3000gtvr4 in forum Yamaha Open Discussion
    Replies: 11
    Last Post: 09-18-2007, 11:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •