Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2013
    Abingdon Virginia

    Yamaha 1200 suv mag bearing crankcase pins

    Will the mag bearing go in and the pins line up if the bearing is reversed. I read that if the pin has been pushed into the case the bearing can be reversed but the oil hole won't line up. Can someone on this fantastic forum help me. Thanks Blaine

  2. #2
    Yamaha artisan Cutlass's Avatar
    Join Date
    Oct 2010
    Madison, WI, USA
    why do you wanna reverse the bearing? I'd just use the correct way, as designed.

  3. #3

    Join Date
    Mar 2013
    Abingdon Virginia
    Thanks for the replies but im afraid i may have it in backwards not on purpose.I was reading Osidebills coments stating the bearing could be installed backwards if the lignup pin was pushed in due to an inexperienced assembler installing the bearing backwards.If the pin is there I dont think it will fit backwards and have room for the thrust washer.Im trying to keep from spliting the cases again. Thanks Guys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2002 Yamaha 1200 SUV (Twin Cities)
    By WaterDR in forum Yamaha 2 Stroke Skis
    Replies: 1
    Last Post: 02-22-2013, 04:33 PM
  2. Yamaha 1200 SUV Clear Access/Inspection plates
    By Acehardly in forum Yamaha Projects & Build Threads
    Replies: 1
    Last Post: 06-01-2012, 09:45 PM
  3. 2001 and 2004 Yamaha 1200 SUV Primer pump question
    By macGruber in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 03-24-2012, 02:32 PM
  4. 2002 Yamaha 1200 SUV Winterization Instructions
    By WaterDR in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 09-27-2009, 10:29 PM
  5. yamaha 1200 mag crank bearing
    By brianf in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-03-2009, 08:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts