03-27-2013, 05:08 PM #1
need more travel on throttle body cable but maxed out on adjustment
This is on my conversion ski. I would post there but its apparent only 2 people view that thread and my therapist is runnin out of ideas...
So heres the deal for all u engineers
Aftermarket throttle body...
u can see on the handlebar pic i ground down the finger throttle and even notched the grip for more travel...
On the throttle body pic the black plastic adjuster is as far back as it will go...any farther it would be off the stud...
the cable is right where it needs to be for idle but when i pull the finger throttle i still need another good 1/4" to get the butterfly opened all the way..
Ideas needed guys...
03-27-2013, 05:14 PM #2
03-27-2013, 05:15 PM #3
03-27-2013, 05:22 PM #4
Have you tried bending the finger throttle lever forward
03-27-2013, 05:22 PM #5
- Join Date
- Jun 2008
- GREECE ATHENS , NAXOS
03-27-2013, 05:24 PM #6
Umi fingerthrottle moves in an angle which gives you more movement. I have an extra. Can you grind on the buttom of the lever a bit will it be enough?
03-27-2013, 06:17 PM #7
Did that already still need more
QUOTE=rxpdoo;2131560]Umi fingerthrottle moves in an angle which gives you more movement. I have an e
xtra. Can you grind on the buttom of the lever a bit will it be enough?[/QUOTE]
03-27-2013, 06:44 PM #8
Pick up your phone i will call you
03-27-2013, 06:51 PM #9
I run the Riva billet seadoo finger throttle and it works well
03-27-2013, 07:12 PM #10
Reduce the circumference of the slotted 1/2 circle (Cut some out) and shorten/adjust the cable (To take up the slack)?
I'm trying to picture the way it should happen if you reduce the 'wheel' size on the TB.
You need to change the ratio of the trigger wheel to TB wheel... Either make TB wheel smaller or trigger wheel bigger.
Cut the slot?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By blastedm3 in forum Polaris PWC PerformanceReplies: 24Last Post: 08-27-2012, 02:50 PM
By 05RXT82Mi/hr in forum Yamaha PWC Performance (4-stroke)Replies: 2Last Post: 08-24-2011, 10:34 AM
By abarrassr07 in forum Sea Doo ClassifiedsReplies: 1Last Post: 08-05-2010, 09:21 PM
By marionr26 in forum 2-Stroke PerformanceReplies: 0Last Post: 05-08-2009, 09:02 PM
By KamikazeGPR in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 04-23-2008, 04:33 PM