Thread: M1 seadoo
03-31-2013, 11:40 AM #1
When I connect the M1 with the LTC 4.9 with bosch lsu 4.9 and open the LTC manager the laptop can't find the lambda sensor. It keeps searching. Lambda is not working.
Do i need to buy lambda option for M1 in addition to buying the LTC 4.9 unit?
How do I verify that i have option 2 logging on my M1, i paid for it.
Your help is appreciated.
04-01-2013, 09:13 PM #2
The M1 has no lambda upgrade, so thats not your problem.
Has the LTC been programmed to 500K to suit the Seadoo CAN speed.
If not then you will need to remove it from the ski and power it up seperately and reprogram it through a USB To CAN device (UTC)
Its not an easy task if you dont have a loom made to suit so I would send it to your local dealer to do.
But before you do that you should look at the M1 to see why the lambda is no go
What errors do you see when the engine is idling
Best thing is to send me a log file and I will work from there
04-04-2013, 03:44 AM #3
I sent you an email still not working I emailed you what I did
05-06-2014, 01:00 PM #4
- Join Date
- Jun 2007
I have same problem with the LTC. Can I change it through M1 or need to do so you explain it above?
®Has the LTC been programmed to 500K to suit the Seadoo CAN speed.
If not then you will need to remove it from the ski and power it up seperately and reprogram it through a USB To CAN device (UTC)®
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Jarrett in forum Sea Doo Open DiscussionReplies: 8Last Post: 06-24-2005, 01:16 PM
By Pee2xUSee in forum 4-Tec PerformanceReplies: 7Last Post: 06-22-2005, 07:45 PM
By rx4pain in forum Sea Doo Open DiscussionReplies: 4Last Post: 06-02-2005, 06:02 PM
By rapidacceleration in forum 4-Tec PerformanceReplies: 3Last Post: 06-02-2005, 03:24 AM
By 1FastTrespiper in forum Sea Doo Open DiscussionReplies: 2Last Post: 05-11-2005, 01:10 PM