Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    Join Date
    Jun 2008
    Location
    Hillsborough, North Carolina
    Posts
    141

    Tripples PSI test kit (Lowell), Flywheel Holder, Used 66v Cylinder and other goodies!

    Sold the ski's and cleaning out the garage. I have some specialty tools and alot of new gaskets, o-rings and other parts that I never got around to using. So, if anyone is interested in these please reply or call me at nine one nine, 8 one 5, thirty-nine thiry-five. Ask for Ray.

    Brief list includes: (All of these parts and tools were for use with a 00GPR and 99XLT Waverunners) Lowell Horning (tripples) PSI test kit, Flywheel Holding Tool, Intermediate and Pump shaft tools. New parts, never been used include: Crankshaft seals and gaskets, cylinder base and head gaskets, exhaust gaskets, o-rings (various), Reverse bucket cable, Flywheel/generator o-ring, Power-Valve coupplers (no waveater clips though), Powervalve gaskets, shaft seals and clips. I even have alot of other bolts, screws and thingy's that aren't listed. If interested, please reply to this ad and I will get back to you.Click image for larger version. 

Name:	2013-03-22_20-19-13_940.jpg 
Views:	83 
Size:	109.0 KB 
ID:	296592Click image for larger version. 

Name:	2013-03-31_17-12-44_844.jpg 
Views:	79 
Size:	74.7 KB 
ID:	296595Click image for larger version. 

Name:	2013-03-22_21-56-03_906.jpg 
Views:	69 
Size:	88.3 KB 
ID:	296597Click image for larger version. 

Name:	2013-03-22_20-25-24_510.jpg 
Views:	91 
Size:	82.7 KB 
ID:	296599Click image for larger version. 

Name:	2013-03-22_20-18-35_309.jpg 
Views:	67 
Size:	121.9 KB 
ID:	296591Click image for larger version. 

Name:	2013-03-22_20-19-13_940.jpg 
Views:	83 
Size:	109.0 KB 
ID:	296592Click image for larger version. 

Name:	2013-03-31_17-12-44_844.jpg 
Views:	79 
Size:	74.7 KB 
ID:	296595Click image for larger version. 

Name:	2013-03-22_21-56-03_906.jpg 
Views:	69 
Size:	88.3 KB 
ID:	296597Click image for larger version. 

Name:	2013-03-22_20-25-24_510.jpg 
Views:	91 
Size:	82.7 KB 
ID:	296599


  2. #2

    Join Date
    Jun 2008
    Location
    Hillsborough, North Carolina
    Posts
    141

    More Pic's of stuff...

    Click image for larger version. 

Name:	2013-03-22_20-22-58_13.jpg 
Views:	72 
Size:	78.6 KB 
ID:	296601Click image for larger version. 

Name:	2013-03-22_20-20-05_393.jpg 
Views:	66 
Size:	103.0 KB 
ID:	296602Click image for larger version. 

Name:	2013-03-22_20-24-04_422.jpg 
Views:	71 
Size:	87.3 KB 
ID:	296603Click image for larger version. 

Name:	2013-03-22_20-25-40_621.jpg 
Views:	68 
Size:	91.8 KB 
ID:	296604Click image for larger version. 

Name:	2013-03-22_20-22-41_88.jpg 
Views:	78 
Size:	91.1 KB 
ID:	296600Click image for larger version. 

Name:	2013-03-22_20-22-41_88.jpg 
Views:	78 
Size:	91.1 KB 
ID:	296600Click image for larger version. 

Name:	2013-03-22_20-22-58_13.jpg 
Views:	72 
Size:	78.6 KB 
ID:	296601Click image for larger version. 

Name:	2013-03-22_20-20-05_393.jpg 
Views:	66 
Size:	103.0 KB 
ID:	296602Click image for larger version. 

Name:	2013-03-22_20-24-04_422.jpg 
Views:	71 
Size:	87.3 KB 
ID:	296603Click image for larger version. 

Name:	2013-03-22_20-25-40_621.jpg 
Views:	68 
Size:	91.8 KB 
ID:	296604Click image for larger version. 

Name:	2013-03-22_20-22-41_88.jpg 
Views:	78 
Size:	91.1 KB 
ID:	296600

  3. #3
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    How much for head gasket and cylinder exhaust gasket and base gaskets

  4. #4

    Join Date
    Jun 2008
    Location
    Hillsborough, North Carolina
    Posts
    141
    Hey "thatdude596",

    Sorry, but I forgot to state that I would like to sell all this stuff together, I didn't even state the price! I'm looking for $500. plus the actual shipping/insurance charges to your destination. I am losing my you know what on this deal but need to be done with it all at once. Am hoping someone out there is looking for a good deal to start their own Yamaha adventures or maybe someone who is a lot more capable at re-selling things than I am.

    Its been awhile since I posted anything and am kinda re-learning how to do this again. Sorry.

  5. #5
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    Ok you might have better luck and listing each item and condition if your looking for 500.00. It's very hard to see what really all is there. If you decide to part the lot give me first crack

  6. #6

    Join Date
    Jun 2008
    Location
    Hillsborough, North Carolina
    Posts
    141
    Anyone out there interested in these parts? Just off the top of my head, there's gaskets for the cylinders, heads, power-valve covers and carbs. I know there's a set of crankcase seals too. Lots of new bolts including the little ones that go in the carb shafts. Lowell Horning pressure test kit, heavy duty coupler remover tool (I used two of these to make "one") and even a few tail lights and wiring harness kit for the ski trailer. I don't need this stuff anymore and would like to let everyone know this is a real deal for someone who has the 99-00 1200 waverunner.

    If $500 is too much, please make me an offer and I will consider it. I am presently looking for a quality electronics BGA workstation, so if someone is looking to trade?...

  7. #7
    Banned User
    Join Date
    Aug 2011
    Posts
    5,049
    +1
    238
    I think hats just a standard test kit for a single pipe ski

  8. #8

    Join Date
    Jun 2008
    Location
    Hillsborough, North Carolina
    Posts
    141
    The test kit is for the OEM 1200PV engine + pipe(s). Three inlet covers and one outlet cover that goes on the exhaust manifold pipe. (U-pipe I think everyone called it?)

    I'm showing the $200 gauge I used to set the pop-off pressure on the carbs. I may even have the regulator set up out there somewhere to go with it if anyone needs this stuff it is a great deal!

  9. #9
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    I'd be interested in all the engine parts/gaskets, and maybe a couple of the tools

    pm me your number to chat

  10. #10
    I pm'd you about the cylinder

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts GOOD - ready to use - 66v Cylinder Needed
    By CDW78 in forum Yamaha Classifieds
    Replies: 3
    Last Post: 08-22-2013, 02:08 PM
  2. SOLD Lowell EFI pressure test kit for 1300...
    By Pale Rider in forum Yamaha Classifieds
    Replies: 12
    Last Post: 06-11-2012, 04:34 PM
  3. FS Lowell horning gp1200r pressure test kit
    By jplowman2005 in forum Yamaha Classifieds
    Replies: 3
    Last Post: 02-25-2011, 04:12 PM
  4. Please Help! - Need to Borrow a Pressure Test Kit
    By NeVerMind in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-22-2008, 09:44 PM
  5. R&D Auto Trim Kit For RXT: Anybody use it?
    By cdalesch in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-05-2008, 07:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •