Results 1 to 7 of 7
  1. #1

    Join Date
    Mar 2009
    Location
    Montgomery, AL
    Posts
    63
    +1
    1

    Changing 04 Flywheel bolts to 06+ ??

    Here is my question: I am changing out my 2004 RXP flywheel bolts with the upgraded 06+ OEM ones. Question is do I use Loctite 243 on the new bolts (the service manual says to, however I know it was written for use of the old standard bolts)??

    Also what is the torque value on the new bolts and is there an angle torque requirement. I lost the little piece of paper that came with the new bolts. Thanks in advance.


  2. #2
    Kiwi spanner handler
    Join Date
    Dec 2007
    Location
    Christchurch NewZealand
    Posts
    579
    +1
    13
    look at the online manuals for the later engines as the new specs are there. the new bolts come with Loctite so don't add any and from memory its around 15nm + 60 degrees but someone will know the exact number

  3. #3

  4. #4
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    while your in there its time to do the SC oil spray nozel upgrade too

  5. +1 by:


  6. #5

    Join Date
    Mar 2009
    Location
    Montgomery, AL
    Posts
    63
    +1
    1
    Where do I find the information on how to and what parts are needed for the SC oil spray nozel upgrade?

  7. #6
    cjohnsey21's Avatar
    Join Date
    Aug 2012
    Location
    Hunterdon County, NJ
    Posts
    50
    +1
    1
    Quote Originally Posted by tacomaguy00 View Post
    Where do I find the information on how to and what parts are needed for the SC oil spray nozel upgrade?
    http://www.greenhulk.net/forums/show...t=95136&page=5

  8. #7
    oct6454's Avatar
    Join Date
    Sep 2008
    Location
    Gig Habor, Washington
    Posts
    758
    +1
    8
    11ftlb and 50 degrees on angle torque gauge

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 11-22-2014, 12:48 PM
  2. Flywheel bolts change on 06 rxp?
    By TheGunMan in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 03-26-2013, 05:47 PM
  3. 04 flywheel bolts?
    By battsy in forum 4-Tec Performance
    Replies: 43
    Last Post: 12-11-2008, 05:09 PM
  4. flywheel bolts change
    By andre in forum 4-Tec Performance
    Replies: 8
    Last Post: 12-01-2008, 12:47 AM
  5. Anyone know what bolts to use to pull flywheel?
    By r33pwrd in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-15-2007, 09:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •