Results 1 to 4 of 4
  1. #1

    Join Date
    Aug 2011
    Location
    Austin
    Posts
    16

    Virage reverse cable routing

    I had a damaged hull and had to move all components into a new hull. It seems I don't have the reverse adjusted just right and didn't take sufficient pictures. First, can someone take a picture of how their reverse cable is held to their reverse gear assembly. There is a small plate with two screws but I'm not sure I have it right. I see a black cylinder attached to the cable sheath but I'm not sure where it is suppose to go. Also can someone describe or take pictures of the cable routing through the hull.


  2. #2
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324

  3. #3
    ripcuda's Avatar
    Join Date
    May 2010
    Location
    Newman Lake, WA
    Posts
    2,389
    +1
    166
    Did you see this thread detailing the reverse lever (and how to fix a stiff one)? Some videos and pictures.

    http://www.greenhulk.net/forums/showthread.php?t=72450

    The round barrel (cylinder) attached to the cable is where it attaches to the lever assembly. Insert the barrel in the pocket under that little plate and lock it down with the two screws. The hooked rod end that slides inside the cable will attach to the part of the lever assembly that moves back and forth. Should be a small hole to insert the hooked tip and then put a washer and cotter pin in the hooked end of the cable to keep it from coming out.

    Cheers!

  4. #4

    Join Date
    Aug 2011
    Location
    Austin
    Posts
    16
    The black barrel is not under the attachment plate. I will give that a try.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Reverse cable routing on Ultras
    By ultraman250 in forum Kawasaki How To & FAQs
    Replies: 0
    Last Post: 04-28-2016, 08:23 AM
  2. Swapping Virage TX reverse cable
    By thehemi in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 04-29-2010, 11:37 PM
  3. WTB Virage TX reverse cable
    By thehemi in forum Polaris Classifieds
    Replies: 4
    Last Post: 04-26-2010, 10:05 AM
  4. Reverse water routing
    By shooter98xpl in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 03-30-2008, 07:31 PM
  5. Reverse cable
    By GoatnRXP in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 12-27-2007, 06:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •