Thread: 2009 & 10 Is shaft removal
04-07-2013, 03:43 PM #1
2009 & 10 Is shaft removal
since I found nothing on this subject, I thought I would share what I have learn so far, both 2009 & 10 have a screw on top hat, you need to make or buy a female spline adaptor so you can turn the shaft while someone else holds a wrench on top hat, I made one by welding a nut to the end of a old impeller #1 you need a partner #2 spline adapter to hex head nut #3 adjustable wrench which opens to at least 35mm . have partner hold wrench on top hat ,turn shaft clockwise (because the top hat has reverse threads )pull shaft back, remove top hat , remove shaft and carbon seal. just a note there is a update have your parts guys on a new 08,11,or 12 shaft carbon seal and top hat and c-clip and replace everything this two year set up sucks bad more info to come later
04-07-2013, 08:53 PM #2
Even worse when the pump bolts back out and the drive shaft is stripped!!!!!!
04-07-2013, 10:14 PM #3
The pump bolt issue is under a service bulletin.
Seadoo fixes it for free...
04-08-2013, 07:30 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tchies in forum Sea Doo Open DiscussionReplies: 12Last Post: 12-04-2008, 12:30 PM
By Franko in forum 4-Tec PerformanceReplies: 3Last Post: 08-05-2007, 12:48 AM
By Franko in forum 4-Tec PerformanceReplies: 3Last Post: 07-18-2007, 12:11 PM
By twinstack1 in forum Kawasaki Tech Tips and InfoReplies: 0Last Post: 06-21-2007, 10:30 AM
By njgprider in forum Yamaha How To & FAQsReplies: 5Last Post: 08-22-2006, 04:25 PM