Thread: Namura Technologies Pistons
02-22-2007, 10:59 PM #1
Namura Technologies Pistons
Are these pistons any good? Im rebuilding the RZ and this brand as a kit is much less than the wiseco.
Im rebuilding the motor then putting the bike up for sale.
Im moving up to a Duck.
The add states:
All Namura pistons have molybdenium/teflon skirt coatings. The advantage of this is:
Least possible resistance
Least possible wear
Extends the life of the piston
Namura Technologies pistons also have a anodized dome for superior heat resistance, longer life and super high silicone content for added strength.
02-22-2007, 11:36 PM #2
02-22-2007, 11:53 PM #3
After looking at Numara's,I just realized you could get Wiseco's made for Vito's forged super stocks good for 6-8 hp for 200.00 for the kit with wristpins and bearings,is well worth the extra 60 bucks.I might have some used .030's if you want me to look.
02-23-2007, 12:49 PM #4
How the heck you been, Mick? How's the new house coming?
02-23-2007, 09:55 PM #5
02-23-2007, 10:00 PM #6
I want to fix the RZ correctly so the new owner wont come back to me and say i ripped him off.
Unfortunally the piston loss scared the cylinder so I have to bore the thing out. The pistons are stock right now.
02-24-2007, 10:18 AM #7
Vito's forged Super Stock Pistons are basically modded pro-lites,machined down on the top of the piston,on the exhaust side to match the port.It allows the piston to mimick raising the exhaust port 1.5 mm increasing mid to top for 6-8 HP.I'd like to see some pictures,if you dont have a buyer I might be interested
02-25-2007, 12:58 AM #8
id like to see pics as well i have a 84 kenny roberts rz but mine needs some missing body parts . mine runs great just cosmeticly ugly. do you still run the oil inj? mine has a set of pipes and aftermarket carbs but the rest is stock.
03-04-2007, 11:44 AM #9
I installed some new clear injector lines to keep an eye on the oil in case of any air bubbles.
Im running stock carbs and some aftermarket pipes.
Here is what the piston that I took out looked like.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By excess in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-19-2006, 08:29 AM
By Pale Rider in forum 4-Tec PerformanceReplies: 45Last Post: 04-13-2006, 10:06 AM
By HOSS in forum Sea Doo Open DiscussionReplies: 3Last Post: 04-06-2006, 01:50 PM
By tmoschella in forum 4-Tec PerformanceReplies: 5Last Post: 03-04-2006, 08:38 AM
By 01xdime in forum 4-Tec PerformanceReplies: 14Last Post: 12-06-2005, 02:31 PM