02-23-2007, 02:12 PM #1
Ram-mount for GPS install for the Ultra250
I can't find anywhere on this top deck to mount a GPS, other than velcroing it to some obscure location or on top of the glovebox lid...which you have to get in/out of all the time.
Out of desperation, I mounted it to the inner/upper side panel, using a Ram-mount universal, and a tourtech GPS mount.
It is a Garmin 3/3+/5 series mount.
02-23-2007, 02:16 PM #2
- Remove the side panel.
- Pilot your holes for the ram-mount.
- Either find a way to handle the bolts from inside the double walled panel, or cut a couple of access holes on the outside of the panel.
- I used M5 bolts and nylocks with some fender washers to secure the ram mount to the panel.
- Re-assemble, and adjust the ram mount so that the adjustable steering can't hit the mount.
02-23-2007, 02:36 PM #3
02-23-2007, 03:02 PM #4
02-23-2007, 03:03 PM #5
Why don't you guys do that, and write it up?
02-23-2007, 03:06 PM #6
Where does the other half of the GPS go along with the antenna mount.
You should paint that ski. Or at least update it.
Nice work Hydro.
I see we are going in two differant directions. lol
Last edited by Skips313; 02-23-2007 at 03:09 PM.
02-23-2007, 03:09 PM #7
02-23-2007, 03:09 PM #8
It won't fit on the ultra either. I needed something to fit without gutting mirrors, and drilling 2" holes.
02-23-2007, 03:11 PM #9
02-23-2007, 03:13 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jarcynvicnchris93 in forum Polaris Open DiscussionReplies: 5Last Post: 04-28-2015, 09:09 AM
By stinkhammer in forum Kawasaki PWC Performance (4-stroke)Replies: 0Last Post: 08-06-2013, 03:34 PM
By Green Hulk in forum Sea Doo How To & FAQsReplies: 42Last Post: 08-09-2011, 07:37 PM
By Hydrotoys in forum Kawasaki How To & FAQsReplies: 10Last Post: 03-23-2007, 04:00 PM
By petee_c in forum 4-Tec PerformanceReplies: 13Last Post: 01-16-2007, 11:52 AM