Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: SC hose clamps

  1. #1
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41

    SC hose clamps

    Hi all,

    I just sent my SC to Jerry for rebuild but I wonder what to use to substitute the hose camps on the hose between the SC and the intake?

    The original was "crimped" and I do not have the tool for them and want not to purchase the tool for just this two clamps

    Thanks


  2. #2
    My name is Sean and I am addicted to STXs smokeysevin's Avatar
    Join Date
    May 2008
    Location
    Houston
    Posts
    4,485
    +1
    320
    I have used standard stainless steel worm drive hose clamps on the boat I service with no issues.

    Sean

  3. #3
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Tbolt clamps

  4. #4
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,851
    +1
    742
    These are what you want for SC, IC, and exhaust.

    http://www.siliconeintakes.com/index...161758898dfa9f

  5. #5
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41
    what size to order for SC to throtle body on 2006 RXP?

  6. #6
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41
    Should I order 2.75" or 3" clamp vrom the link above?

    Please advise

    Thanks

  7. #7
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,851
    +1
    742
    You need to measure your current hoses at the SC, IC, TB, and exhaust due to all ski's being different. This is the ONLY way to make sure you purchase precisely what you need.

    Some of these hoses use 2.5", some 2.75", and some 3". If you use a SC R&D adapter with kanaflex hose on your intake you will need 4".

    Bottom line, measure and count up exactly what you need and get a few spares.
    Last edited by jpt7779; 04-18-2013 at 09:32 AM.

  8. #8
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41
    I mesured the hose as accurate as possible and it is 3"

    at siliconeintakes.com 2.75" t bolt clamp has Actual clamping ability is 2.87" to 3.19". 3" t-bolt clamp has Actual clamping ability is 3.11" to 3.43".

    The Question is which size is mine - if I order 2.75" is it going to fit at all, if I order 3" is it going to be litle bigger than needed

  9. #9
    TheGunMan's Avatar
    Join Date
    Feb 2013
    Location
    Las Vegas
    Posts
    454
    +1
    41
    No one jas used them?

  10. #10
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,851
    +1
    742
    2.75

  11. +1 by:


Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SC hose clamp size
    By ashnic in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-12-2014, 12:57 PM
  2. Ride Plate Wire hose clamps...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 09-24-2008, 01:57 PM
  3. What's everyone using to replace the SC hose clamps??
    By Speed200 in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-29-2007, 05:52 PM
  4. Possible hose clamp replacement?
    By Jarrett in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 05-12-2006, 05:57 PM
  5. Hose Clamps
    By Tube Master in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-03-2006, 09:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •