04-26-2013, 11:03 AM #1
- Join Date
- Apr 2013
Weak spots on RXT and RXP various years
I'm sure this has been covered but I can't seem to find it.
What are the weak spots of the RXT and RXP models as the years progressed from the first production year to the later models. I know there were bad valves in these and ceramic washers in those and on and on. Also talk about hull problems if any. Can some one either point me to where this was covered or cover it here? I am in the market for a RXT and/or RXP and want to know what to look out for.
One other thing. If, for example, a 2004 RXP had a blown engine and a new engine or short block was ordered from SeaDoo, will it have all the upgrades and improvements or will it still be a 2004 with all it's inherent problems?
04-26-2013, 11:19 AM #2
04-early 06 had the Bad/weak valves, the head oil pressure restricter, flywheel bolts.
04-28-2013, 04:27 PM #3
is there an easy way to check my valves... without takng the valve cover off?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JonnyRXT in forum Trailer ClassifiedsReplies: 0Last Post: 05-02-2010, 10:52 PM
By heavyjetpilot in forum Sea Doo Open DiscussionReplies: 6Last Post: 02-25-2010, 07:16 PM
By Tiburon in forum Sea Doo ClassifiedsReplies: 3Last Post: 09-18-2009, 08:10 PM
By tmc84 in forum 4-Tec PerformanceReplies: 30Last Post: 08-07-2007, 12:02 PM
By BigWoody in forum Sea Doo Open DiscussionReplies: 0Last Post: 06-19-2007, 12:38 PM