Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    Map for 1000 cc with 15 or 18 psi turbo boost

    Is there any member in the board running 15-18 psi of boost with 1000cc injectors if yes can you please post your map so that i can test it because i am either to lean or to rich either way it is a real b!tch to get it started.


  2. #2
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    a map for what?
    motec... fuel?

    most of my maps are for e-85
    but I have one for pump gas and 15psi
    how would I post it here?..... I cant seem to post any photos at this time
    Last edited by skidoochris; 04-26-2013 at 05:54 PM.

  3. #3
    Quote Originally Posted by skidoochris View Post
    a map for what?
    motec... fuel?

    most of my maps are for e-85
    but I have one for pump gas and 15psi
    how would I post it here?
    here is my data log from vtech logger

    Attachment 299580

  4. #4
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    looks like garbage data o2 sensor not working

  5. #5
    GasResearch-VT.SE's Avatar
    Join Date
    Nov 2012
    Location
    Melbourne, Australia
    Posts
    1,172
    +1
    207
    Quote Originally Posted by skidoochris View Post
    looks like garbage data o2 sensor not working
    x 2

    Looks like a sensor that has been wet, used for too many hours or that has remained in the exhaust gas un-powered for too many hours, got hot, is not heating etc... Get a new sensor if this what you see
    (Or not plugged in!)

  6. #6
    Quote Originally Posted by GasResearch-VT.SE View Post
    x 2

    Looks like a sensor that has been wet, used for too many hours or that has remained in the exhaust gas un-powered for too many hours.
    (Or not plugged in!)
    wet yes i had issues after testing a few maps prior to B 80 Special they ran to rich and after removing the plugs i noticed they was dripping wet, i then put new plugs and idle is a lot smoother but any way around the 02 taking it out letting it dry or it is crapped? ive had it for a few months i guess i killed it.

  7. #7
    do you have a sameple log what it should look like?

    ps: my o2 is pre-turbo could this be the reason the extra pressure is giving false readings?

  8. #8
    this is unplugged i went to test and data log but noticed it was unplugged after i got back.
    Attachment 299687
    Last edited by DR2006RXP; 04-27-2013 at 10:59 PM.

  9. #9
    this is what i got today at idle with a few revs and o2 plugged in at normal scan rate.
    Attachment 299688
    Last edited by DR2006RXP; 04-27-2013 at 11:01 PM.

  10. #10
    westy's Avatar
    Join Date
    May 2007
    Location
    Australia (Bundaberg)
    Posts
    1,132
    +1
    45
    generally pre turbo will not give you in accurate readings , the back pressure will just kill the sensor early

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD BRAND NEW** for sale ET RACE supercharger wheel 18 psi **$600**
    By 02gpR in forum Yamaha Classifieds
    Replies: 23
    Last Post: 06-05-2012, 11:08 AM
  2. Info for guys running over 18 psi with stock superchargers.
    By Gunna in forum Yamaha PWC Performance (4-stroke)
    Replies: 17
    Last Post: 04-15-2011, 03:06 PM
  3. SeaDoo sportster 15' or moomba boomerang 18'.
    By Ryker in forum Open Discussion
    Replies: 1
    Last Post: 09-08-2010, 10:12 AM
  4. WTB for RXP 14/19, 15/20 or 15/19
    By camar0 in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 09-03-2008, 08:53 AM
  5. Lost 1000 RPM with 15/20 and 81 Reduction Nozzle
    By excess in forum 4-Tec Performance
    Replies: 11
    Last Post: 09-02-2006, 03:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •