Thread: 2012 px engine code help
05-07-2013, 05:58 PM #1
2012 px engine code help
i just installed a free flow exhaust and took it out to ride today when all the sudden the engine check light came on with error code p0127 which i read on here was something with the air intake temperature. it only seemed to throw the code when i went wot. when cruising around it seemed to be fine but the second i went wot it would throw the code and drop me to 6k rpms. so my question is does this seem like more a faulty sensor or what? and would a free flow exhaust void the warranty? and is there anything i can check before i decide to drop it off to the dealer? i had it out just last week and had no issues prior to free flow exhaust.
05-07-2013, 06:35 PM #2
is the IC getting good flow of water?
05-07-2013, 06:37 PM #3
i would have no idea.... id have to guess so seeing as i didnt touch the cooling lines and there wasnt an issue before....
05-07-2013, 06:46 PM #4
i had it out last tuesday no issues at all. put the free flow exhaust on sunday. went riding today and this thats what happened.....
05-07-2013, 06:54 PM #5
disconnect the sensor and clean it and try again it might work.
05-07-2013, 07:27 PM #6
for the guys who posted with the same thing and finding out it was the sensor. did it only happen at wot but while cruising it never really seemed to throw the code???
05-08-2013, 05:41 AM #7
07-23-2013, 02:51 AM #8
- Join Date
- Jul 2013
sorry but if you take away the key and put what happens
immediately goes into protection
07-23-2013, 04:28 AM #9
- Join Date
- Jan 2012
I had the same Problem at Sunday with my RXPX 2012 Model. Error P0127. I ride also the Free Flow Kit since 10 HR - No Problem, but i have the Riva GENIII Intercooler... i think there is the Problem...i change yesterday to the OEm Intercooler..i will test it now.
I read the ski out with the candoo...Error P0127 = Intercooler System Fault.... !
07-23-2013, 05:10 AM #10
- Join Date
- May 2010
im wondering if your intake temp is to high because of poor cooling? If you have can doo, you can reset the ecu. Also there is monitoring on the candoo. Can't remember if it shows intake temp.
Good info here
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Dan416 in forum Polaris Open DiscussionReplies: 3Last Post: 08-25-2011, 05:08 PM
By Venator in forum 4-Tec PerformanceReplies: 10Last Post: 12-10-2006, 07:58 PM
By Ronn25 in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 05-19-2006, 11:38 PM
By Big Red Monster in forum 4-Tec PerformanceReplies: 8Last Post: 09-04-2005, 08:06 AM
By 01xdime in forum 4-Tec PerformanceReplies: 4Last Post: 08-19-2005, 07:07 PM