Results 1 to 2 of 2
  1. #1

    how do you install an oil injection block-off plate on a 97 stx 1100

    i decided i wanted to pre-mix my gas and i bought a block-off plate, what exactly needs to be done to convert my engine over for this on my 97 stx 1100.


  2. #2
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    5,008
    +1
    283
    First, mix oil in the gas and ride it a while to mix it up and get oil throughout the fuel system.

    Next, unbolt the pump and put the plate in it's place. Remove the hoses from the carbs. Your blockoff kit may come with caps to install on the nipples on the carbs where the hoses went.

    Remove the oil reservoir and unplug the low oil sensor.

    Store all the parts so you can sell them to someone that want to go back to injection.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts 701 (Single Carb) Primer Kit & Oil Injection Block-Off Plate
    By Adam E. in forum Yamaha Classifieds
    Replies: 0
    Last Post: 07-29-2015, 07:13 PM
  2. FS - Parts R&D Oil injection block off plate and caps...free !
    By jetdave56 in forum Yamaha Classifieds
    Replies: 2
    Last Post: 01-19-2013, 02:38 PM
  3. GP1300R, How to know if has Oil Injection Block-Off
    By jwaked in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 11-22-2010, 03:27 PM
  4. FS oil injection block off plate
    By N8R in forum Yamaha Classifieds
    Replies: 4
    Last Post: 04-11-2010, 09:31 AM
  5. Putting oil pump block off plate on
    By mboley in forum Polaris Open Discussion
    Replies: 2
    Last Post: 04-19-2007, 11:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •