Results 1 to 2 of 2
  1. #1

    Gasket thickness help!

    1995 waveblaster-single carb
    Bought 1/32 thick fiber gasket sheet from auto parts store. (good for fuel/oil/water applications) Making gaskets for reed valve, intake manifold cover, carb base and air cleaner base. Although the gasket that were on the reed valve and intake manifold cover seemed to be thinner, can I use 1/32 thick material instead? I also see the carb base gasket is THICKER than 1/32. Can I use the 1/32 for the carb base and air cleaner base?
    I also may use a very thin coat of Halomar gasket sealant to have gaskets adhere /seal better.

    So--Does gasket thickness matter in these areas?

  2. #2
    Myself's Avatar
    Join Date
    May 2007
    North Central Arkansas
    The only place it would really matter is the base gasket. If you still have a stock head you have plenty of clearance anyway. It will be just fine.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Yamaha SUV gasket missing help
    By birdgod in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 07-28-2015, 06:22 PM
  2. seadoo 4 tec head gasket thickness
    By blackrxp in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 02-04-2015, 09:03 PM
  3. Pro 785 Base Gasket Thickness
    By beerdart in forum Polaris PWC Performance
    Replies: 4
    Last Post: 01-12-2014, 11:31 AM
  4. 97 900zxi intake gasket question, HELP!
    By honkifyoubonk in forum Kawasaki How To & FAQs
    Replies: 2
    Last Post: 09-08-2012, 12:37 AM
  5. Gasket question - HELP ASAP - before the husband screws it up
    By sunshine_n_pc in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 05-17-2010, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts