Results 1 to 3 of 3
  1. #1

    Exhaust Stinger Bolts

    I am in the process of removing the stinger exhaust in a 2001 Yamaha 1200 xlt. I have all connectors and bolts removed except for the 4 bolts that are holding the stinger to the heads. These bolts are the ones that also mount the grease hose and the lifting rings. They are extremely tight and I do not want to break them. Is it okay to add heat to these bolts in order to get them to release?

  2. #2
    Ski Hacks MG's Avatar
    Join Date
    Apr 2013
    I used an impact on low air and they came right off.

  3. #3
    Quote Originally Posted by CCW View Post
    I used an impact on low air and they came right off.
    Thanks. I used some heat and they came out with less force and threads look good. Now just a matter of wrestling the stinger out of the hull which is proving to be a real pain in the butt.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GP1200r Stock Exhaust Stinger Mount Bolt
    By starjoe in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-28-2012, 10:12 PM
  2. Snapped Exhaust manafold Bolts, how to remove?
    By 95xp-dooster in forum 2-Stroke Performance
    Replies: 7
    Last Post: 08-11-2008, 02:15 PM
  3. exhaust manifold bolts
    By Pale Rider in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-23-2007, 07:36 PM
  4. Exhaust Manifold Bolts
    By JFizzleJR in forum 4-Tec Performance
    Replies: 2
    Last Post: 08-16-2007, 11:41 AM
  5. Broke Exhaust Manifold bolt off in cylinder
    By mboley in forum Polaris Open Discussion
    Replies: 6
    Last Post: 03-13-2007, 11:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts