Thread: Seadoo 2011 rxtx AS 260 exhaust
05-21-2013, 08:31 AM #1
Seadoo 2011 rxtx AS 260 exhaust
Hey guys First post on here. have been reading through the forum in order to do some mods on my ski which is happening in the next couple of weeks. need some help and advise thanks in advance.
Ok so I have a seadoo rxtx AS 260 I will be getting springs retainers 4inch intake exhaust intake grate and prop with a vtech tune.
So here is the question Iam having issues sourcing out an exhaust for my AS suspension model ski. I know their is and IS model exhaust avilable but not the thru hull AS model exhaust. Dose anybody have any Information on this?
Also what speeds would I be looking at with this setup and will it be reliable?
Thanks in advance guys for any help that could be provided
05-21-2013, 05:58 PM #2
U should be getting 72-75 mph pending on prop and rpm ...
What rpm reflash are u getting ?
05-22-2013, 12:10 AM #3
05-22-2013, 08:04 AM #4
RIVA rear exhaust ... If it fits on your model ...
There is a bypass pipe ...
05-22-2013, 11:02 AM #5
I have the AS as well and I used the Riva Exhaust. I would also go with the heavy duty valve springs. I have seen more than one ski break or float a valve.
05-22-2013, 02:55 PM #6
Add a Bilge pump to your mods..
It's a life/ski saver.
Also a new inner cooler because the factory 2011 inner coolers are crap and I've seen a lot of damage caused when they take a dump...
05-22-2013, 09:21 PM #7
Thanks for the advice guys so the riva one dose fit? I will add that bildge pump too
05-23-2013, 02:07 AM #8
05-23-2013, 06:05 AM #9
I got the last Pirahana Parts exhaust with out let , fitted perfect ...
05-23-2013, 06:22 AM #10
Hey pete thanks for the photos. Seems easy enough on a solid hull but with suspension components it's not as easy as it seems. Iam pretty sure you know of napper aka chris who is doing the install on the retainers and springs and the tune. He has his IS ski wih a riva thru hull I think but apparently it says on the riva exhaust they hull it dose not fit the AS model and we are both not quite sure why that is because the only difference is between the 2 models ones suspension is controlled by the ecu and one done manually.
Wsmc90 have you got the link for the exhaust that you bought and put on? I really need this exhaust sorted before I take it too get the mods done as I really only want too take the top deck off once.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By masta2000 in forum 4-Tec PerformanceReplies: 18Last Post: 10-31-2012, 02:03 PM
By DON1098 in forum 4-Tec PerformanceReplies: 136Last Post: 10-04-2011, 11:30 AM
By DON1098 in forum 4-Tec PerformanceReplies: 5Last Post: 09-06-2011, 01:38 PM
By BEECHFRONT in forum 4-Tec PerformanceReplies: 3Last Post: 08-24-2011, 02:17 PM
By DJKINN13 in forum Sea Doo Open DiscussionReplies: 0Last Post: 07-30-2011, 07:43 AM