Results 1 to 9 of 9
  1. #1

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194

    1999 SLTH no spark and no MFD while cranking

    I picked up a cheap 1999 STLH project ski. I was told there is no spark. What I know so far is that the MFD does not power on during cranking. I do have 130 psi in both cylinders. The 1/4 amp fuse in the electronics box is blown. Does this fuse have anything to do with spark? Thanks


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,602
    +1
    1,277
    The 1/4 Amp fuse is for the MFD display.

    See my signature links for lots of useful info. There are links for testing the red domestic ignition components, primarily the magneto stator and ignition coils.

    Note that the ignition system requires a really strong battery or you will not have spark.

  3. #3

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194
    I am looking for the electronics update kit 2873022. Does anyone have one or know where I can find one? Thanks.

  4. #4

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194
    If the display is disconnected will that still allow for spark?

  5. #5
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,602
    +1
    1,277
    Quote Originally Posted by dalepatter View Post
    If the display is disconnected will that still allow for spark?
    MFD display does not affect ignition if the display is unplugged from the connector on the rear.

  6. #6

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194
    Thanks for letting me know.

  7. #7

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194
    So my stator and coil tested bad. I have not been able to find the upgrade kit except for on Ebay for $800. What are my options?

  8. #8
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    The coils aren't that hard to find. I will look. I may have a stator here........

  9. #9

    Join Date
    Apr 2010
    Location
    Michigan
    Posts
    194
    I will try and pull the stator soon, and then I should have the part number. Thanks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris slth no spark ,stator reads bad and cdi has bubbles on it
    By J max in forum Polaris Open Discussion
    Replies: 0
    Last Post: 08-13-2013, 04:27 PM
  2. No spark and water temp alarm
    By ybnormal in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 08-02-2009, 11:02 AM
  3. 1999 slth no spark
    By retro in forum Polaris Open Discussion
    Replies: 3
    Last Post: 06-20-2009, 05:02 PM
  4. No spark and steady buzzer
    By eric1238 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 06-11-2007, 12:15 PM
  5. 1999 1100ZXi No spark!!
    By tyler_stephen in forum Kawasaki How To & FAQs
    Replies: 5
    Last Post: 06-06-2007, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •