02-27-2007, 07:53 PM #1
Idea for water return line for fuji
I do not know if it would be worth doing but if someone has acess to the right material and equipment, I would like to have something like this made (see pic). This would elimnate the coolant rail, and would allow me and others to use indvidual hoses for the water return. I am planning on running three pissers so I can tell what the temps are on each cyclinder. This mod would allow me and others to do this easily. Just an idea....
02-27-2007, 10:31 PM #2
- Join Date
- Sep 2006
I did this mod on mine, Use a heat gun to check temps on each cylinder. Than restict the coolest cylinder. Try to get them even.
02-27-2007, 10:45 PM #3
What's the distance of the bolt holes? If it's the same as the Domestic engines you can use the plates off of the Octane.
#7 in the photo, I have about ten of these floating around.
02-27-2007, 11:00 PM #4
i just got a rough measure of them and it looks to be about 1 3/8" between centers...
02-28-2007, 05:25 AM #5
McMaster Carr... Item # 91733A402
Maybe someone (Beer?) has the tap and tool so you won't need to buy the whole kit?
It's really the best way...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Water4fire in forum 4-Tec PerformanceReplies: 3Last Post: 06-22-2013, 11:35 AM
By skigolfnut in forum 4-Tec PerformanceReplies: 9Last Post: 09-03-2012, 08:20 AM
By Grimmi03 in forum Kawasaki PWC Performance (4-stroke)Replies: 0Last Post: 07-17-2009, 10:37 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 10Last Post: 07-08-2006, 07:28 PM
By Totallyblown in forum 4-Tec PerformanceReplies: 2Last Post: 02-03-2006, 12:08 PM