Results 1 to 4 of 4
  1. #1

    Join Date
    Sep 2012
    Location
    Belleville, ON CANADA
    Posts
    45
    +1
    1

    Question on magneto and cup swap 05' to 06'

    Hey Guys,

    I'm only getting 10vdc out of my regulator. I think I've got a broken winding in my stator, its an 06 block. Can I swap an 05' Magneto and 05' Cup into my 06' cover? All the clearances look okay. Figured you guys have been down this road and can maybe tell me if I can or can't.

    Cheers!
    Last edited by B.L.P.; 05-27-2013 at 04:55 PM. Reason: wrong info


  2. #2
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    do the wires come out of the cover in the same spot? I think I remember them being different. ???

  3. #3

    Join Date
    Sep 2012
    Location
    Belleville, ON CANADA
    Posts
    45
    +1
    1
    Yes everything is the same, the cps sensor is external but stator is same location. I just went ahead and installed it, the external diameter of the cup is the same but the internal diameter of the 06' cup and 06' magneto are different. Im just waiting for brp dealership to open so I can get some oil in it. I'll fire it up and see where I'm at and post back.

  4. #4

    Join Date
    Sep 2012
    Location
    Belleville, ON CANADA
    Posts
    45
    +1
    1
    Yup works fine, seeing 13.5V at battery terminals now with ski running.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Novice pwc owner question on Seafoam and carb cleaner spray
    By franklb99 in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 07-27-2012, 09:12 AM
  2. Few 750 Questions on fuel and reeds
    By Slipknotanfitch9 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 06-23-2011, 09:55 PM
  3. 08 T-X Question on grate and prop
    By williet in forum 4-Tec Performance
    Replies: 10
    Last Post: 05-21-2010, 06:21 PM
  4. Question on High Altitude Props RXTX - 2800 to 3800 Feet
    By Bigcat1 in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-16-2009, 05:23 PM
  5. newbie questions on trailer and ride plate
    By NJRXP in forum Sea Doo Open Discussion
    Replies: 27
    Last Post: 02-05-2007, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •