Thread: 82mm nozzle on an FZR?
06-02-2013, 05:57 PM #1
82mm nozzle on an FZR?
Can you safely run an 82mm nozzle ring on an FZR without worry of over stuffing the pump? I need to pull my rpms down some and currently have a 84mm ring on there. Hitting the 8850 limiter now and need to pull the revs down.
06-02-2013, 06:08 PM #2
I think that xltchad tried the 82mm when his stuffed and hurt him seriously. You can PM him to find out. He was running upper 70s with R3 and Et LB wheel.
06-02-2013, 06:12 PM #3
06-02-2013, 06:18 PM #4
Yeah XLT Chad was running the 81mm on his ski.
You need to be very careful with that nozzle; it's not worth a broken neck.
see Jerry's comments here in post #18...
06-02-2013, 06:44 PM #5
- Join Date
- Aug 2012
dont risk hurting yourself and pull the prop.if your lazy run the shaft over with the car and give it a quick bend on the pump.
06-02-2013, 06:52 PM #6
Add more pitch?? New prop?? Twin??
06-02-2013, 06:58 PM #7
Jd1 was running a 82 or 81 mm on his turbo boat with a 160 mm pump
06-02-2013, 07:28 PM #8
06-02-2013, 07:33 PM #9
06-02-2013, 07:42 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By TX21 in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 08-06-2012, 10:31 PM
By Ricky Bobby in forum Yamaha PWC Performance (4-stroke)Replies: 0Last Post: 03-24-2012, 10:22 PM
By Oldman in forum Yamaha ClassifiedsReplies: 1Last Post: 02-16-2011, 09:19 PM
By 2fast4u in forum Yamaha ClassifiedsReplies: 2Last Post: 12-07-2010, 07:19 AM
By 305coco in forum Yamaha ClassifiedsReplies: 1Last Post: 09-11-2010, 04:06 PM