Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1

    Cool What mods should you have to get with a C3 Monster Wheel?

    Was just wondering what should go with the very few mods I have to get the C3 on it comfortably. All's I have is the R&D Grate, R&D Plate, Prop, power plenum air filter, pump seal kit... And about what speed might I see after?


    Thanks, Ant...


  2. #2
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    R3, Intercooler, Riva cooling kit and a skat or solas prop, Vx plate

  3. #3
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122
    I would add:

    - R&D R3 reflash
    - Intercooler (not the R&D upgrade to the stock one!)
    - Ribbon delete (called manifold upgrade)
    - HKS or other style Blow off Valve
    - I know you have the R&D plate and for alot of rougher water thats probably a good plate, but if you want speed a Vx plate will get you several additional MPHs.

    Then be prepared to have to replace your clutch at some point if you don't already have a 2013 one in there.

  4. +1 by:


  5. #4
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    Def a ribbon delete.....and tap manafold

  6. #5
    I noticed there seems to be a few different intercoolers? Which & Why?

  7. #6
    I better clutch or is the one in there just not a good one?

  8. #7
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    RIVA one is good and stout and expensive......it works well.......Fizzle is a good affordable option have not heard of any issues with them......the new R&D intercoolers are cool and there are some options there......it all really boills down to money, how much do you want to spend......and remember you get what you pay for

  9. #8
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122
    Quote Originally Posted by Dicedrop25 View Post
    I better clutch or is the one in there just not a good one?
    What year is your ski? There have been 3 different generations of clutches 09's (ok but a weak sprag element), the 11's (Yamaha beefed up the sprag the then they sheered teeth off the gears - WORST ONES!) and now the 2013 ones which are holding up very well with no reported failures.

    As for an intercooler, I prefer the Fizzle IC kits or the Riva coolers over the R&D ones.

  10. #9
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    Quote Originally Posted by Dicedrop25 View Post
    I better clutch or is the one in there just not a good one?


    What year is your ski?

  11. #10
    2012...

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what mods should i do next if i only have bout 500 to spend
    By soldierpage in forum 4-Tec Performance
    Replies: 22
    Last Post: 03-12-2011, 07:05 PM
  2. What Voltage Should You Start To Get Worried?
    By duramaxxed in forum Sea Doo Sport Boats
    Replies: 4
    Last Post: 08-07-2008, 06:13 PM
  3. What Mods Should I Go With?
    By green05rxt in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-02-2007, 07:46 PM
  4. What mods should I do to my stock 97 GP1200..
    By 2lick in forum Yamaha Open Discussion
    Replies: 7
    Last Post: 02-11-2007, 08:28 PM
  5. RX grab BAR?? Did you have to mod it???
    By Water4fire in forum Sea Doo Open Discussion
    Replies: 14
    Last Post: 03-16-2006, 05:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •